i was told you make or can make a mount for an 8” sub. I am trying to replace my speakers and trying to figure out how to mount a bigger sub there.Greetings. This is a half build and half promoting thread. I want to document my 3d printed parts/accessories and share the design/fabrication process.
List that shows what is currently available to purchase:
Make 1: Scangauge II Mount for Toyota Land Cruiser 100 SeriesMake 2:M2 V1: Rocker Switch Mount for the Lower Right Center Console PanelM2 V2: RAM Ball Mount for the Lower Right Center Console PanelM2 V2 LEFT: RAM Ball Mount for the Lower Left Center Console PanelM2 V3: Magnetic Mic MountMake 3: Scangauge II Mount for Toyota Tacoma Gen 2M3 V1 Scangauge II Mount for Toyota Tacoma Gen 2 Type 1M3 V2 Scangauge II Mount for Toyota Tacoma Gen 2 Type 2M3 V3 Rocker-switch Mount for Toyota Tacoma Gen 2 Type 1M3 V4 Rocker-switch Mount for Toyota Tacoma Gen 2 Type 2Make 4: Multiple Rock Switches Mount for Toyota Land Cruiser 100 SeriesM4 V1: Six Rocker SwitchesM4 V2: Five Rocker Switches + One Map LightM4 V3: Extra Clearance (ARB Style Automotive Rocker Switches)M4 V3T: Extra Clearance (Toyota OEM Switches)M4 V4: Extra Clearance with one Slot for DimmerMake 5: Scangauge II and Rock Switches Combo Mount for Toyota Land Cruiser 100 SeriesMake 6: Change Pocket MountM6 V1-V5: Change Pocket MountM6 V6: Change Pocket RAM Ball Base MountMake 7: Rear Cooler Switch Hole Mounting PlateMake 8: Voltmeter MountMake 9: Kenwood TM-V71A Remote Head MountMake 10: Multi-switch Mount with 12V Outlet or USB PortsMake 11: Scangauge II Mount with 12V Outlet or USB PortsMake 12: Scangauge II Mount for Mini-Homelink Overhead ConsoleOverview of three versionsM12 V1: Round-upM12 V2: Square-offM12 V3: MinimalistMake 13: Transfer Case Lever CapMake 16: Third Row Ashtray Replacement PanelMake 17: Sub-woofer CoverMake 18: Third Row Cup Holder Replacement PanelMake 19: Fot Light MountMake 19 V1: Fog Light Mount (Rigid D2)Make 19 V2: Fog Light Mount (Baja Designs Squadron)Make 19 V3: Fog Light Mount (Diode Dynamics SS3)Make 21: Overhead LED ReplacementMake 22: Kenwood TM-D710G Remote Head MountMake 23: YAESU FTM-400XD MountMake 24: EZFix of door switch panelMake 25: Door Step (Door Trim Protector)Make 26: Wheel cap for Method NV WheelMake 27: Mic Adapter in Rocker-switch FormatMake 28 V1: Cupholder (Butterfly version) InstructionMake 28 V2: Cupholder (Non-Butterfly version)Make 29: Second-row Cupholders ReplacementMake 30: Keystone Device Mount in Rocker-switch FormatMake 33: Center Storage InsertMake 34: Hazard/DiffLock Switches Swap KitMake 35: Switch Pros SP-9100 Switch Panel MountM35V1: For regular overhead consoleM35V2: For minilink overhead consoleMake 36: ICOM IC-2730 MountMake 37: Icon Compression/Rebounds Wheel CapsMake 40: Small Rocker Switch Mount for Mini-Homelink Overhead ConsoleMake 41: RAM Mount Compatible Multi-function FixtureMake 42: Dummy FlangeMake 46: Center Storage Deep Hole UtilizationMake 50: Hood Struts Safety ClipMake 53: TJM T17 Baja Designs S2 Mounting KitMake 59: AUXBEAM Switch Panel MountMake 60: sPOD Switch Panel Mount
View attachment 2330077
Suggested Project List:
- Ashtray mount for rocker switches or USB ports.
- Third row AC redirection duct.
- A panel to replace the original panel by the left knee.
- Rocker switch mount at the center console pocket (See Make 6).
- USB charging port at the back of the center console (See Make 7).
- Cup holder
- Kenwood TM-V71A remote head mount (See Make 9).
- Multi-switch mount with 12V outlet (See Make 10).
- Scangauge II mount with 12V outlet (See Make 11).
- Something in Door Ashtray Slots (by savirc).
- Scangauge II mount for the mini HomeLink console (See Make 12).
- Third-row Ashtray Panel (See M16 V1).
- Third-row Cup Holder Panel (See Make 18).
- Subwoofer Panel
- Shifter Knob
- Morimoto XB universal kit mount ( from @spaber05)
- 7in round headlight replacement (from @jay3253)
- Variation of M2 to mount a Ram ball (from @geanes and @gregnash) (See M2 V2)
- "...my overhead DVD played didn’t work when I bought the truck. I have no idea what could go there, but it would be pretty cool to see what you come up with! Maybe a pocket for CB radio with some lights on the sides? Or maybe just a piece that holds some LEDs that can be wired into the cargo lights so they come on when the doors open? " (from @aaronrules)
- something to fill part of the door slot @Otter
- A snap on cover that prevents items from blocking or restricting air intake for those with rear A/C @James Bentley
- "Ben, I was thinking about the ash tray in front. I know if I pull the tray out my iPhone 11 (pro) will fit. I was wondering if you could fab up a shelf that could have a built in Qi charger. A person could then enter, slide the phone in and it would charge (and if you had wireless CarPlay or whatever the android version is) you’d be coed free and the phone would be out of the way.“ @CBdeJ