Builds Benjamin’s 3D Prints Build (25 Viewers)

[BenCC]

Those look sweet! Way into V2 and V3. I can't wait to check them out.

I will send you all of them, V1, V2 and V3.

 

[BenCC]

Make 12 V3

 

[Connorham]

Make 12 V3 looks great!

Would buy.

 

[BenCC]

Make 4 V2: Multiple Rock Switches and Map Light Mount for Toyota Land Cruiser 100 Series

M4V2.1 Overview of the Final Product

M4V2.2 Introduction

This is to address one request of adding a red map light.

M4V2.3 Design and Fabrication

This a derived design from Make 4 V1.

M4V2.4 Purchase List to Complete the Installation

Map Light (11 mm version)

M4V2.5 Purchase Link

$49 + $7.9 (USPS Priority). Printed with ABS in Tan, Grey, or Black. PM for Direct Paypal Payment.

 

[BenCC]

Make 12 V2: Scangauge II Mount for Mini-Homelink Overhead Console

Overview of three versions

M12V2.1 Overview of the Final Product

M12V2.2 Introduction

M12V2 may have limited view angle. This is designed to have a better view angle.

M12V2.3 Design and Fabrication

Original plan was to attach the mount to the overhead panel through snap fit. But I don't think it is secure upon inspecting the prototypes. I added a "wishbone" bracket to mate with the overhead console utilizing three existing holes. The wishbone enhances the security of the snap fitting. No rattle at all.

M12V2.4 Purchase List to Complete the Installation

Ethernet Extension Cable

M12V2.5 Purchase Link

$49 + $7.9 (USPS Priority). Printed with ABS in Tan, Grey, or Black. PM for Direct Paypal Payment.

 

[BenCC]

Make 12 V3: Scangauge II Mount for Mini-Homelink Overhead Console

Overview of three versions

M12V3.1 Overview of the Final Product

M12V3.2 Introduction

This is a minimalist design by positioning a big portion of the Scangauge inside the overhead console.

M12V3.3 Design and Fabrication

M12V3.4 Purchase List to Complete the Installation

Ethernet Extension Cable

M12V3.5 Purchase Link

$50 + USPS Priority. Printed with ABS in Tan, Grey, or Black. PM for Direct Paypal Payment.

 

[Gesose]

If anyone needs a ScanGauge for one of these awesome mounts, AutoZone has them for $135 plus a 20% coupon - brings it to $107 with free shipping. Not bad.

ScanGauge II Digital Trip Monitor

Shop for ScanGauge II Digital Trip Monitor with confidence at AutoZone.com. Parts are just part of what we do. Get yours online today and pick up in store.

www.autozone.com

@BenCC I’ll be hitting you up for one of these soon. Will likely have a request for a bit of custom.

 

[Cleric Duran]

Still need to paint but this a revision Ben made based on my feedback it has a 35 degree angle and is pushed further back to clear the front ridge. It gives better visibility for taller or upright seating positions.

I tried to take a photo from my line of sight to give best representation. This is much better than before because I was losing about 25% of the top screen. If you are concerned about losing sight of the top left button then don't get one with aux button. I won't changethe buttons so the benefit of the aux and slight loss of visibility works for me

 

[Hugh Heifer]

Interesting dash cover.

 

[Cleric Duran]

Thanks

Interesting dash cover.

Thanks I threw it in when I purchased three row full seat covers from Escape gear.

 

[BenCC]

Still need to paint but this a revision Ben made based on my feedback it has a 35 degree angle and is pushed further back to clear the front ridge. It gives better visibility for taller or upright seating positions.

I tried to take a photo from my line of sight to give best representation. This is much better than before because I was losing about 25% of the top screen. If you are concerned about losing sight of the top left button then don't get one with aux button. I won't changethe buttons so the benefit of the aux and slight loss of visibility works for meView attachment 2153527

I am glad the revision works. I revised all the designs to this configuration (pushes back, and tilted to 35 deg).

 

[abuck99]

Brilliant work Ben-

Someday I'd like to see some sort of useful cover to replace the drop down DVD screen mounted above the second row seats.

 

[Sargy]

Brilliant work Ben-

Someday I'd like to see some sort of useful cover to replace the drop down DVD screen mounted above the second row seats.

So much room for activities and ideas up there

 

[abuck99]

Hey Sargy

 

[Sargy]

Hey Sargy

Whats up!

 

[Hugh Heifer]

I am glad the revision works. I revised all the designs to this configuration (pushes back, and tilted to 35 deg).

Do I get a coupon for owning a defective unit?



I kid, I kid

 

[BenCC]

Brilliant work Ben-

Someday I'd like to see some sort of useful cover to replace the drop down DVD screen mounted above the second row seats.

I don’t have that on my truck. What would you put in there? Any idea?

 

[BenCC]

Do I get a coupon for owning a defective unit?



I kid, I kid

Do you also have the limited view angle? If so, I can print a revised version for you and send it to you for free.


And I want to make an announcement here:

Anyone that has purchased a Scanguage mount, including Make 1, Make 5, and Make 11, and has limited view angle such as lose the top 25% screen, message me. I will print a revised version for free. Shipping is also on me.

 

[Flipped Bezel]

You da man @BenCC !!

Great job on these. I look forward to following you future product builds!

 

[Roosevelt T]

If anyone needs a ScanGauge for one of these awesome mounts, AutoZone has them for $135 plus a 20% coupon - brings it to $107 with free shipping. Not bad.

ScanGauge II Digital Trip Monitor

Shop for ScanGauge II Digital Trip Monitor with confidence at AutoZone.com. Parts are just part of what we do. Get yours online today and pick up in store.

www.autozone.com

@BenCC I’ll be hitting you up for one of these soon. Will likely have a request for a bit of custom.

Is this a good price these days? I could have sworn I've seen them for as cheap as 85 bucks before. Anyone know?