- Thread starter
- #41
yeahh that’s never happening again - huge mistake
Lucy Liu, a long overdue 5.3 build thread (3 Viewers)
- Thread starter EasternYeti
- Start date
-
- Tags
- builds
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
yeahh that’s never happening again - huge mistake
- Thread starter
- #42
Slow progress. Seeing the roof rails straight as an arrow is going to take some getting used too. Second coat of primer Is on the roof - once a few spots are cleaned up the third and final coat will go on later this week.
After that there’s a few small things that need to be addressed and its onto paint
I’ll try to find a “before” picture, but it was mangled pretty bad. The surface of the moon looked better. It’s almost a shame a rack is going to hide these lines
After that there’s a few small things that need to be addressed and its onto paint
I’ll try to find a “before” picture, but it was mangled pretty bad. The surface of the moon looked better. It’s almost a shame a rack is going to hide these lines
Can confirm.
Looking good! You bringing her to SAS5?
- Thread starter
- #46
you bet, it’s hiatus is ovaaaa
Nice! Already looking forward to it, brotha.
- Thread starter
- #48
Here’s a little sneak peek after three base coats and five clear coats buffed to a high gloss - the glass is back in, along with door handles, locks and new seals
slowly grinding forward with this. I’ll get some real pictures soon as it looks much better out in the open
slowly grinding forward with this. I’ll get some real pictures soon as it looks much better out in the open
Last edited:
- Joined
- Jul 22, 2012
- Threads
- 484
- Messages
- 14,262
- Location
- Winter Park, Florida
- Website
- www.cruisermatts.com
That first dent is going to feel sooo good.
There is a reason my truck looks the way it does.
@EasternYeti Just don’t let her be a trailhead princess. Looking mighty nice!
- Thread starter
- #51
I know you guys wouldn’t allow it - so sliders are in short order
- Thread starter
- #52
HAHAHAHAH please DONT remind me
NeverGiveUpYota
Dare me.
Brown is better, I think you should change it.
- Thread starter
- #55
Sanded, compounded, and polished the stainless B-Pillars last night - can’t wait to put them in
No more cracked ghetto plastic
Before:
After:
No more cracked ghetto plastic
Before:
After:
Last edited:
rhah
Admit it, your cruisers jealous
better be showing up with a crown.... got way to much shiny s*** going on this rig
- Joined
- Jul 22, 2012
- Threads
- 484
- Messages
- 14,262
- Location
- Winter Park, Florida
- Website
- www.cruisermatts.com
I’m working on figuring out how to get the Iron butt at SAS since you have me beat by about 200 miles
- Thread starter
- #58
Remember it only counts if it’s a round trip chief @POTATO LAUNCHER might have to track our rigs by gps
POTATO LAUNCHER
TLCA #6928
Actual miles driven in your Cruiser are the requirements.
- Thread starter
- #60
