Green Bean
SILVER Star
What have you done to your Land Cruiser this week? (59 Viewers)
- Thread starter IH8MUD
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Making some progress on my FJ40 today..
new top cover for quarter channels... not for the Land Cruiser purists.. budget repair.. but work for me..
clean rusty chennal .. and coat with primer..
new top cover for quarter channels... not for the Land Cruiser purists.. budget repair.. but work for me..
clean rusty chennal .. and coat with primer..
Last edited:
Were you going North on Wenatchee Ave last week? Thought I saw you. Waved but I was in the wife's RAV4.
Watch for an old, bald guy in a modded Nautical Blue 4Runner or a dark blue RAV4 with bull bar, that's me!Yep that was most likely me…sorry I didn’t wave back. I was probably texting, drinking or putting my mask!! Kidding lol
Will do…did you sell your 40?
Tidying up the bed and bolting things down.
Last edited:
Not yet=a couple of lookers. Thinking about having a friend drive it over to the "Triangle".
Thinking about converting it to an automatic and adding power steering and brakes but $$$$$$$$$$ (?)= would likely take me "years"!
KingAir Driver
SILVER Star
Wrapped up the drum brake job on all 4 corners and installed some Bilstein 5100’s. Took blue for its longest test drive in years, had a good chase car.
Began stripping down the engine for the older intake manifold and header. Began stripping the sloppy previous owners paint job on the block as well. Only one broken bolt and it gave me enough to weld on a nut!
John in Utah
SILVER Star
Spent some time down the rabbit hole after sending my PS box to West Texas Offroad for a rebuild. I can see how this is such a slippery slope now that I don't need to daily the 40 ".... while the steering box is out then I could do a full steering rebuild - and then I should fix the knuckle job I butchered last year - and then if I'm going to cruiser outfitters I could get a period correct brake mc - and then the front main is leaking oil - and then ...."
Thankfully I stopped myself before the body mounts came apart.
If anybody needs to borrow a factory knuckle centering tool, send me a PM
Thankfully I stopped myself before the body mounts came apart.
If anybody needs to borrow a factory knuckle centering tool, send me a PM
I changed out my windshield seal/gasket. A 
job but one big part has to be moved out of the way first. I expected my 40 year old seal to be crusty and stiff and it wasn’t? It was very supple and in great condition. It really didn’t need to be changed. I’m thinking maybe some one changed it in the last 20 years?
Big shout out to @ToyotaMatt for supplying the new OEM part
devo
job but one big part has to be moved out of the way first. I expected my 40 year old seal to be crusty and stiff and it wasn’t? It was very supple and in great condition. It really didn’t need to be changed. I’m thinking maybe some one changed it in the last 20 years?Big shout out to @ToyotaMatt for supplying the new OEM part
devo
Lit a fire.
blossett
SILVER Star
Brought the chassis to the painter to install the finished tub!
I dreamed up ASCO and AISIN HUB Dials #7 gold cad bolts kits
Comes with 14 PCs total
2 for trail Spares.
Comes with 14 PCs total
2 for trail Spares.
My windshield is missing this piece. Does anyone know what this is?
Finished up the manual steering box swap, and tightened up the new drag link. Took the 40 on probably the longest drive since Ive owned it. It finally drives pretty nice and doesn't wander.
