Builds POTM - March, 2014 - Javelina By Pablo Cruise

[PabloCruise]

I read the whole thread finally. Nice Pablo! That was a score finding your rig in Wyo without an engine in that good of condition! My bones are not as good. I see why you chose to keep it in a near factory state. your perseverance paid off! At one point you had it for sale and decided to see it through.

You had so many links in this thread I kept getting side tracked with so many interesting articles here on MUD. I finally started using my bookmarks more often. Should have been doing this all along!

I do have a few questions and observations.

I assume that the 3FE uses the same mounting points on the frame? I didn't see any confirmation either way?

The rear bumper Fabricator link is dead. Is this still available or do you, or someone, have a file could be used to send cut send? I like that simple design! I am a less is more kinda dude.

The radiator mod on the mounting points was genius!!!

Early in the thread you mentioned(page 1) the LCML....wow that brought back some memories. I used to read that email everyday! That's when I had my '79 FJ40. I totally forgot about the LCML. Due to life circumstances I had to sell that 40 and was bitter about it. At that point when I would see a LC I just looked away for a while. I couldn't stay away forever though. When I decided I wanted another LC I found MUD. I feel like somehow MUD replaced LCML.

Your getting ready for the 5 speed. I have one to install as well. I just may start it now. Maybe we can exchange notes.

Thanks for sharing your LC experience.

Thanks for reading!
I found this Pig in NM, it was the Pig that donated the 3FE (and the ideas) that came from SLC and then went on to break down in WY.
Let me see if I can address your questions...

Yes - 3FE uses the same mounts as the F/2F.

The rear bumper is a Bump It Offroad original design. @gonzopancho and I are working to bring those products back - stay tuned!

I am glad you like the radiator idea!

Glad you are back in Cruisers.

Yes - the 5 speed! I have some things to figure out...

 

[PabloCruise]

is this installed yet?


View attachment 3708986

Oh man...

Break out the popcorn!

 

[PabloCruise]

We’re bringing it back. Deal is in flow.

This ^^^

Stay tuned y'all!

Bump It Offroad (BIO) - Coming (Back) Soon

Hello Friends! We are excited to announce that Bump It Offroad is back! For a minute it looked like Bump It Offroad was going away. The folks at TriMeki (@Fe3 ) had a better idea, and now Bump It Offroad (BIO) is a TriMeki company. Bump It Offroad started in 2007. Anyone who has BIO products...

forum.ih8mud.com

 

[PabloCruise]

Tj
Been out of town again. I’ll get some pics your way after flight from Houston to Tulsa. Text me any specifics you want from the flying pig and it’s 5 speed install.

Thank you sir!!!

 

[PabloCruise]

I am wondering if the bolts mounting the 4 speed were correct, does anyone know, can anyone tell me what the factory spec bolts are for the transmission mounting to the bellhousing?

 

[PabloCruise]

It sounds like the 3 speed clutches are more prone to shuddering.

I do not know if it was in adjustment, I had no idea how to adjust the 3 speed clutch... I know I have the hotspots.

FJ40 3 Speed Clutch Help Please. Squeak and Chatter/Vibes

forum.ih8mud.com

 

[PabloCruise]

So what would you all do if you were me?

Keep the 3 speed kit?

Or round up the 4 speed items and switch?

 

[RUSH55]

Has that flywheel been turned before?
If not, you may be able to have it turned as long as it’s within spec. If NOT, and you have to get a new flywheel - flip a quarter.
Better yet, flip a Bi-Centennial Ike Dollar!

 

[WarDamnEagle]

Has that flywheel been turned before?
If not, you may be able to have it turned as long as it’s within spec. If NOT, and you have to get a new flywheel - flip a quarter.
Better yet, flip a Bi-Centennial Ike Dollar!

When I sent my FZJ75 transmission off to Georg for repair I tried to get the flywheel turned locally. Couldn't find anyone locally that could or would do it. Wound up shipping one in from Partsouq.

 

[RUSH55]

When I sent my FZJ75 transmission off to Georg for repair I tried to get the flywheel turned locally. Couldn't find anyone locally that could or would do it. Wound up shipping one in from Partsouq.

I just can’t see any real reason to switch to a 4 speed flywheel in this specific instance (if there are both clutch options available for this applications) unless there’s an issue obtaining a new 3 speed flywheel.

 

[PabloCruise]

Has that flywheel been turned before?
If not, you may be able to have it turned as long as it’s within spec. If NOT, and you have to get a new flywheel - flip a quarter.
Better yet, flip a Bi-Centennial Ike Dollar!

I’m not sure if it was turned.
The clutch cover says ASCO on it, so maybe original?
If they can’t surface this one I think I will definitely try to round up 4 speed parts…

 

[FJBen]

if they can’t turn your current flywheel, I’d round up all the 2f stuff. Easier to find later on.

That said I’d be really surprised if they couldn’t turn it.


I just don’t know if there is any benefit to running the later 2f over just the F stuff…on a 3FE for an H55F in a pig

 

[WarDamnEagle]

I just can’t see any real reason to switch to a 4 speed flywheel in this specific instance (if there are both clutch options available for this applications) unless there’s an issue obtaining a new 3 speed flywheel.

Didn't mean to imply that he should but I guess the 3 speed ones are NLA so that's implicit in my response. Probably should have just said that I had a hard time finding a shop to turn mine; which was my real comment.

 

[PabloCruise]

Another thought - I am finding a hodge-podge of fasteners in use on or around the bellhousing.
What are people's favorite sources for JIS fasteners?

 

[RUSH55]

Metric Fasteners & Hardware｜BelMetric

Bel-Metric sells metric hardware & specialty automotive supplies worldwide. Visit our website to purchase metric fasteners, nuts, bolts, screws, washers & more.

belmetric.com

 

[RUSH55]

Didn't mean to imply that he should but I guess the 3 speed ones are NLA so that's implicit in my response. Probably should have just said that I had a hard time finding a shop to turn mine; which was my real comment.

NLA? Not even from @cruiseroutfit ?

 

[Ry24000]

I have used the Belmetric and this

JIS / Japanese Fasteners

Newco Products offers a huge inventory of of original parts to assist with the restoration of Japanese classic automobiles. J.I.S. Fasteners are the industry standard, manufactured specifically for these

www.newcoproducts.com

 

[WarDamnEagle]

NLA? Not even from @cruiseroutfit ?

I'm just going to step away.

I have no idea. I assumed that when you quoted me and posted what you did. I'm out of the conversation - not sure I was ever in.

 

[PabloCruise]

NLA? Not even from @cruiseroutfit ?

Kurt has the 3-spd clutch kit, I am just pondering if I want to load that option.
I had no idea the clutch fingers were adjustable?
Who knew?!?

 

[PabloCruise]

NLA? Not even from @cruiseroutfit ?

But def N/A from Toyota.
I think the clutch disc is, but not the pressure plate or cover.