Builds Fly By Night (1 Viewer)

[PabloCruise]

Nice work!

Am I remembering correctly that the hydro-boost does power steering and the power brakes?

 

[J Mack]

Probably the only thing that might be used is the booster

Just bolt one on these on and it should work fine.

Power/Manual Master Cylinder, 1-1/8 Inch Bore

Corvette-style master cylinder has a 1-1/8" bore and is suited for disc/drum combinations. Features dual outlets so the plumbing can come out either side of the master cylinder. These master cylinders will work with manual or power brake systems. They come with a deep-well piston for manual...

www.speedwaymotors.com

 

[RUSH55]

Nice work!

Am I remembering correctly that the hydro-boost does power steering and the power brakes?

Yes, it operates on power steering fluid pressure instead of engine vacuum. The pump required has three ports - one pressure and two returns. I’m looking to probably run a remote reservoir pump, so that will be another puzzle piece to acquire later on. PSC Motorsports has most everything.

 

[scrapdaddy]

One thing I like about the remote PSC reservoir is the filter in it. I bought a box of them and change it out every year.

 

[RUSH55]

Just bolt one on these on and it should work fine.

Power/Manual Master Cylinder, 1-1/8 Inch Bore

Corvette-style master cylinder has a 1-1/8" bore and is suited for disc/drum combinations. Features dual outlets so the plumbing can come out either side of the master cylinder. These master cylinders will work with manual or power brake systems. They come with a deep-well piston for manual...

www.speedwaymotors.com

Kinda have my heart set on this one

 

[bobm]

Oooohhhh. Check Wilwood 2

 

[J Mack]

Kinda have my heart set on this one

Well if you want the best then yeah that's nice too.

 

[RUSH55]

Got another load in from Pegasus - an Aeromotive regulator with -6AN/-6ORB fittings, 3/8” braided PTFE fuel line with a selection of fittings, and some 3/8” textile hose with -6AN barbed fittings and clamps for the vent line. Hopefully this new hat plate will show up and I can spend a couple days over this upcoming weekend getting this show buttoned up.

 

[RHINO]

Kinda have my heart set on this one

View attachment 2844916

thought that was an espresso machine for a minute

 

[RUSH55]

thought that was an espresso machine for a minute

Look closer…

 

[Megadoomer]

ya, Baer. Its a paint mixer. maybe that's Behr. wutevs

 

[RHINO]

Look closer…

them spresso machines have funny italian names ya know,,, its very confusing.

 

[PabloCruise]

thought that was an espresso machine for a minute

It does that too. I think @gonzopancho is going to put one in his Pig!

 

[RUSH55]

Here’s a couple more pics. Maybe the regular style brake lines instead of the banjos looks less espresso machine?

Custom Remaster 6801XXX - Baer Brakes

baer.com

 

[PabloCruise]

them spresso machines have funny italian names ya know,,, its very confusing.

Here’s a couple more pics. Maybe the regular style brake lines instead of the banjos looks less espresso machine?

Custom Remaster 6801XXX - Baer Brakes

baer.com

View attachment 2847850

View attachment 2847851

Now I am confused. That one says it is made in Phoenix, not Italy.

Are Arizonians trying to take on the Italians in the 'spresso machine industry?

Fuhgetaboutid!

 

[RUSH55]

Yes, “MADE IN PHOENIX AZ”. That is why I must have one. More desirable than the one cast from recycled frying pans in a shed in Xing-Pao Province, China.

 

[RHINO]

i like the integrated prop valve, its nice to have access to that in cab, but really, once properly adjusted,,,,,,,,,, made local is pretty sweet.

 

[RUSH55]

When I swapped my F100 over to front discs I tried a used factory proportioning valve with no luck. Switched over to a Wilwood manual adjusting prop valve and was pretty astonished at how much adjustment was necessary before it finally dialed in.

 

[gonzopancho]

It does that too. I think @gonzopancho is going to put one in his Pig!

It’s true, I drink a lot of coffee.

 

[bobm]

Friday night what's up wit yur