What have you done to your Land Cruiser this week? (54 Viewers)
- Thread starter IH8MUD
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
you have been seriously miss-informed by your friend and his oil scientist ...
- taking into account , you must first adhere strictly to the Viscosity Charts in your owners manual and FSM ....
- the moment you drain out the Liquid Fossils , and replace it and them with man-kinds best , nourishing full Synthetics anything ...
- then your Land Cruiser enters the Neutral wear and tear Zone ....
.
took the top off for the first time since as long as we've owned it in the 90's. A bit of corrosion, but not surprising.
I was excited to take it out for a drive and on a 5 or so mile drive, the brake pressure switch blew out the bottom and I lost my brakes, this is the second time it happened. Is this because I purchased cheap aftermarket switches or because I didn't bleed properly? something else? Crazy dangerous.
I was excited to take it out for a drive and on a 5 or so mile drive, the brake pressure switch blew out the bottom and I lost my brakes, this is the second time it happened. Is this because I purchased cheap aftermarket switches or because I didn't bleed properly? something else? Crazy dangerous.
I went on my bachelor trip last friday to maine! was super cool. I did not see alot of land cruisers though. However I did see this jeep sticker at a brewery. somthing seems wrong about it hahaha.
Jeep people dont seem to know the difference.
sterling
SILVER Star
Cut firewall to run ac hoses and 60 series heater line grommet
Last edited:
South Texas 97
GOLD Star
getting ready to pull my transmission for a refresh, so took a couple of hours to clean up the transmission cover. Trans covers are not allowed in schools or libraries (
) found a bit of rust at the top and bottom of the noise damper so pulled it all off, with a wide blade scraper it came off pretty easily
Net result was a clean transmission tunnel
Although this is what I am chasing
) found a bit of rust at the top and bottom of the noise damper so pulled it all off, with a wide blade scraper it came off pretty easily Net result was a clean transmission tunnel
Although this is what I am chasing
In the interest of accuracy, Flatlanderfj40's picture is of Rotella T4 which is their non-synthetic oil and also my choice to use in my 40. Good stuff.
Is this what all of those news articles about trannies in TX are about? I don't see why it's so controversial.Trans covers are not allowed in schools or libraries (
rex in bama
SILVER Star
In the middle of rebuilding the rear brakes and seeing evidence of why the parking brake was not working great!
cruiserkev
3 decades in the same FJ40
Finally finished a project I started years ago. I extended the driver's seat to gain a little more legroom in 2018. Didn't have the opportunity or motivation to do the passenger seat until today. Just simple straps, hand bent and drilled. It's not perfectly even but it looks better visually. Now my ladies won't feel like they are kissing the windshield when I'm driving them around. 
Not just today but the last Month's since a part took forever. I powdercoated the fan shroud and upper thermostat housing off white. Cleaned and painted the radiator housing and horns black. Finally replaced thermostat and all of the radiator hoses with OEM. Funny thing though, I still had to cut some of the tubing a little bit because it was too long in some sections and would kink. It was annoying.
Maine land cruisers are just getting out of winter/ salt hibernation. There are a few in the Portland area (mine included) that are starting to get some road time. What brewery were you at?
I think it was called the bisselle brothers brewery. I had I think 3 beers and I had a hangover for 2 days it felt like haha. My buddy was saying it was pretty warm for when I was up there. I saw a really really clean fj62 in a parking lot. Next time I am up there Ill have to see if I can meet up with some land cruiser people. I want to go back. I got some amazing photos up there. Hopefully I can take Rachael up sometime next spring.
Tire Day!!!! Also, brakes look fine. I was worried they were gonna be toast. Just need an adjustment. I deem it beer run worthy. 
Valve adjustment and some little things here and there to finish up and it's useable enough to start tuning the Sniper.
Valve adjustment and some little things here and there to finish up and it's useable enough to start tuning the Sniper.
Last edited:
Thaweet, scored some racks for the yak the other day, 20 bucks, brand new in the box, works for nowTire Day!!!! Also, brake look fine. Just need an adjustment. I deem it beer run worthy.
Valve adjustment and some little things here and there to finish up and it's useable.
View attachment 3302580
View attachment 3302581
View attachment 3302584
View attachment 3302583
View attachment 3302586
Ackcruisers
SILVER Star
Worked on a few of my 89620-60010, 60011 and 60012 ignitor restorations. Found some rare resistors and NPN transistors from Japan and sourced NOS Denso ignition coils 90919-02083. Still looking around the world for ND 90919-02077 coils as I realized the size difference as shown of the external resisted coils.
Then, typed in What is an “FJ40“ into ChatGPT following 60Minutes on Sunday and within two seconds the AI wrote this:
“The Toyota Land Cruiser FJ40 is a classic SUV that was produced by Toyota from 1960 to 1984. It has gained a reputation as one of the most rugged and capable vehicles ever made, and is known for its off-road capabilities and durability.
The FJ40 was originally designed as a military vehicle, but quickly became popular with civilians as well. It was powered by a variety of engines over the years, ranging from a 3.9-liter inline-six to a 4.2-liter inline-six. It also came with various transmission options, including a three-speed manual and a four-speed manual.
The FJ40 was known for its sturdy construction, with a body-on-frame design and solid axles front and rear. It had a high ground clearance and four-wheel drive, which made it capable of tackling difficult terrain. It was also designed to be easy to maintain, with simple mechanical components that could be repaired in the field.
Today, the FJ40 has a cult following among off-road enthusiasts and collectors. Its rugged design and classic styling make it a popular choice for restoration projects, and well-maintained examples can fetch high prices at auction
Then, typed in What is an “FJ40“ into ChatGPT following 60Minutes on Sunday and within two seconds the AI wrote this:
“The Toyota Land Cruiser FJ40 is a classic SUV that was produced by Toyota from 1960 to 1984. It has gained a reputation as one of the most rugged and capable vehicles ever made, and is known for its off-road capabilities and durability.
The FJ40 was originally designed as a military vehicle, but quickly became popular with civilians as well. It was powered by a variety of engines over the years, ranging from a 3.9-liter inline-six to a 4.2-liter inline-six. It also came with various transmission options, including a three-speed manual and a four-speed manual.
The FJ40 was known for its sturdy construction, with a body-on-frame design and solid axles front and rear. It had a high ground clearance and four-wheel drive, which made it capable of tackling difficult terrain. It was also designed to be easy to maintain, with simple mechanical components that could be repaired in the field.
Today, the FJ40 has a cult following among off-road enthusiasts and collectors. Its rugged design and classic styling make it a popular choice for restoration projects, and well-maintained examples can fetch high prices at auction
Last edited:
Ok now it’s legal in Honolulu!
Just picked my FJ62 up from the paint shop. They did a nice job.
Got the frame and some other parts dipped, including another m416 trailer I'm rebuilding.
