What have you done to your Land Cruiser this week? (73 Viewers)

[billmc]

I made the perilous journey out today for essentials.

Cheap gas and cheap food!

View attachment 2267493

Is that a wide-angle lens? It looks like you have terrible toe-out

 

[fjdiesel]

I drove it to work!

 

[RWBeringer4x4]

I drove it to work!

What’s work? I barely remember what I did for a living before the end of days...

 

[fjdiesel]

What’s work? I barely remember what I did for a living before the end of days...

Hardware store. They say we are "essential" here in MN. I think we are open just so people have somewhere to go. lol. It has been crazy busy!! We have sold sooooo much paint.

So, I get to drive it to work.

 

[FixedIt]

Mounted this, finally! Had to drill the holes for the top hinge since I replaced the rear quarters a few years ago. Nerve-racking!

 

[firefighterjed]

Remounted my 8274.
Welded in a 3 1/2” square tube between the frame horns and a mounting plate to that. Just a little measure, cut cut cut, weld weld weld, paint paint paint.

This is the set up the PO built

I didn’t love the brush bar so I pulled it. And then rear ended someone on a snowy morning this winter.

Removed all the bent parts

Added a crossmember for winch support

Finished product.

 

[Jordan85]

Got it blasted. No surprises!

 

[ToyotaMatt]

Slowly but surely plugging away at # 1 of a dozen or so buckets of Long Lost souls,

once again to proudly mounted to the threaded Pull Stalks as they were
on Day 1

@ Plant A11 .............

 

[ToyotaMatt]

 

[ToyotaMatt]

I have just scratched the new surface of late Model Rockers Restore

it was uniquely different yet , much of the same , i know this is 40 tech , but the

general TECH is similar since on topic ...........

 

[FJDonny]

Mini-truck power steering from Valley Hybrid and exhaust manifold and gasket from SOR. Note - do not install power steering box first. I got too ahead of myself while waiting for manifold to come in and then needed to move the box forward 1/2 inch to clear the header. I now have 4 extra holes in my box mount.

 

[ToyotaMatt]

got up and decided to Blow the dust off some of My NOS Horde ,

i found a cache of Vintage Toyota Lock smith parts tools and supplies online

and grabbed it H55F fast ! ,



so , NOS must now Go to a new home ............

lets see who has a 1972 40 or 55 .................

​

 

[batthewmrown]

View attachment 2268178


View attachment 2268184View attachment 2268183






View attachment 2268182​

Are you hand-painting those knobs? If so, that's some surgical-grade precision!

 

[ToyotaMatt]

Are you hand-painting those knobs? If so, that's some surgical-grade precision!

YES ,

all my switch and knob work is done By hand with Pride the Traditional

TOYOTA way...............

​

 

[Jordan85]

Mini-truck power steering from Valley Hybrid and exhaust manifold and gasket from SOR. Note - do not install power steering box first. I got too ahead of myself while waiting for manifold to come in and then needed to move the box forward 1/2 inch to clear the header. I now have 4 extra holes in my box mount. View attachment 2268339

Is that the final resting place for the power steering cooler? If so, maybe too close to the header...or someone with more experience than I can chime in.

 

[ToyotaMatt]

I also fully restored a 3 speed AU spec. wiper switch ,

these little guys ROCK

also a period correct restored AU spec pull knob ..........

​

 

[boozewz]

Went and checked out an abandoned sky dive plane.

 

[FJDonny]

Is that the final resting place for the power steering cooler? If so, maybe too close to the header...or someone with more experience than I can chime in.

It’s not. Trying to figure out where to put it. Was going to move it when I attach fender. Only place to mount it is on outside of frame I think unless others have ideas.

 

[JohnnyC]

Went and checked out an abandoned sky dive plane.

View attachment 2268390

Looks like a ol Soviet plane

 

[SergP]

Looks like a ol Soviet plane

Yep,.. An-2