Details can be found here with pics: http://www.google.com/base/a/1500849/D3592860660142477716 . I was asking $5800 but will certainly give any mud'er better asking? I need to move it, wife is going insane that we have another Land Cruiser into which we can not all fit.
Overview is that I drove a 3F in a friend's 40 a long time ago and loved it. When the mysteriously tired 2F needed to be replaced, I opted for a 3F-E. The 3F-E is by all means the best gasser engine that a 40 could ever have. It's mated to the stock H42; and considering the H42's 4 gears are about 20% lower than the auto and without the torque converter, there is plenty of power even in the higher end.
It ain't perfect, I have the standard rust issues as you...
FJ40 | BJ40
Classifieds: Toyota 40-series Land Cruiser
Filter by prefix:
.
Filters
Looking for a daily driver/camping rig.
After looking at this and deciding it was way too much work for the money I'm wondering whats out there...
I'm in St. Louis, Mo. but will travel for the right rig. The paint and body do not have to be pretty by any means but I'm hoping for little to no frame rust. I know, I know long shot since I only have about $3k to spend. I could stretch up to $4000 for the right rig but had hoped to spend that $1000 on the stuff that a $3000 cruiser would obviously need.
I'd prefer a 40 since I'm coming from an old 71 early bronco and loved it but the 62s are pretty nice looking wagons and being able to drive long distances and tow a small trailer would be a huge plus.
We all started somewhere... so...
Rust free 78’ project FJ40 for sale in CT
Rust free 78’ project FJ40 for sale:
***Please bear with me as I am not 100% up on my terminology etc., I purchased this project from a relative with the intent to complete it. I have made really no progress as I am busy with other projects and a change of jobs.
I’ll spare the sob story and get to the details…:crybaby:
Build date= April of 77’ And I have the Title in hand.
This 40 started as a frame off restoration. Frame was really good to start and was sand blasted and then epoxy painted. It is now solid and rust free.
Aqualu 1st generation Aluminum tub is installed from firewall back.
All other body panels are solid steel and primed, (no bondo).
2F motor has had...
This is my 72 FJ 40. I am asking $8500, and I am located in Huntingdon, PA. It has a SOA, 350, 4 speed w/ 3 speed t- case, power steering, RS9000 shocks, 38x15.5x15 Ground Hawgs, new driveshafts, lockrite locker in the rear, disk brakes on all 4 corners, hard top and doors, bikini top and soft half and full doors. Thanks for looking.
![1970 FJ40 for sale in CT](https://forum.ih8mud.com/[URL="http://allyoucanupload.webshots.com/v/2002750645087055995"][IMG]http://aycu02.webshots.com/image/16761/2002750645087055995_rs.jpg)
Time constraints and numerous other projects have pushed this one to the back burner and I have decided it is time to free up some storage space and try to thin my FJ herd. So, up for sale is my 1970 Toyota FJ40. I did a lot of work to this truck a few years ago and it has been in storage since.
Body-
This cruiser came over to Connecticut in the early 90’s from California so for the most part the body is sold. It looks like the tub has been repaired a few times over the years in all the typical areas. Top of the wheel wells are patched where the roll bar mounts and in the front where the rest of the cage meets the floor. Before I got it, the body had been removed from the frame and the frame sandblasted, as well as most of the body...
pics to gonnawynne@aol.com have the cash now!!!! thanks
I have been able to get the motor onto the Firestein Mounts and into the front end, but a couple of weeks ago I got hit on my bike and cannot use my left arm (broken collarbone). So this has got to go.
1973 Toyota Landcruiser FJ40
Carburated 350 engine and Turbo 350 Tranny
Body is solid, only small spots in the regular areas, nothing major
Frame is completely solid
Glass is good, tires are good (31's I believe)
The only top I have is a Bikini, it's very rough, but I do have a soft top frame, just not the canvas.
Engine came from an 84 GMC 3/4 ton van, ran fine as I drove the van an hour from it's location to my house for the install. No problems with the engine or transmission.
HERE'S WHAT IT NEEDS: Radiator, Radiator...
I dunno about this one. One pic?
http://cgi.ebay.com/ebaymotors/Toyota-Land-Cruiser-1979-toyota-landcruiser-fj40-4x4-all-original-survivor_W0QQitemZ220141197734QQihZ012QQcategoryZ6443QQtcZphotoQQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Not affiliated but saw it on craigslist....
The location is about 25 miles south east of Burlington, VT.....
http://burlington.craigslist.org/car/397956262.html
___________-
Awesome 4-wheel drive. This car came from California. I have owned it since 1995 and had it in Colorado. Has new engine, clutch, leafsprings. It is in very good mechanical shape and it has very little rust in the back that could easily be buffed out, it was painted in 2001. Comes with new ragtop. Lock out hubs, low miles. $6,800.00 OBO. Call or e-mail for more info. 802-888-5450 or 802-760-7979
Due to a string of bad luck I now am forced to sell my 66 FJ40.
It has the stock F, 3 speed and transfer
welded 78 fine spline rear with a spare open carrier
bucket seats, still have the originals
aftermarket tire carrier, still have the original
78 roll cage with factory pads
small jump seats with SOR pads and CCOT covers
4 wheel disk brakes (monte carlo)
32/36 solex progressive carb
new 35in BFG AT's(5 of them) on aluminum wheels
mini truck power steering
Soft top with 2 piece soft doors(speciality)
Hard top with doors(later model top?)
bikini top
SOR 4 in. lift with u bolt sliders
2F water pump with 78 fan and modified 78 shroud
Parts not installed:
78 fine spline disk brake front end with an aussie locker...
1977 FJ40 previously restored *SOLD*
I am selling my 77 FJ40. I hate to see it go, but my driveway has too many vehicles in it. I have owned this for almost three years now and love it. I'm having a really hard time seeing it go.
It was restored by a previous owner and had an engine rebuild. I had the clutch rebuilt shortly after I bought this vehicle.
I'm asking min of $12,000.
Here are some specifics about the vehicle:
Its located in San Jose CA
Passes CA smog
No AC
Disc Brakes
Manual trans
Ambulance Doors
No rust
tool kit, glove light, original invoice, and manual incl.
new cat eye lights installed (not seen in photos)
warn winch
and its my daily driver.
This is one of the best looking fj's around...
http://sandiego.craigslist.org/car/396543907.html
No affiliation
I have a 1978 fj 40 for sale. It is all stock except for a 4in shackle rev. [custom by prev owmer] and 33x9.50x15 tires. It has 2f with no emmisions and a bad # 6 crank rod bearing. The hard top needs some fiberglass repair and screwed or rivited back down to the frame. The softtop is in good condition except that the zippers are split and will not close properly. the one piece soft doors are in good condition except drivers side wimdow is gone. Also a bikini top, good condition but needs cleaned. All hard top glass is in good condition, but out of the frame. I have some misc. small parts [ nuts ,bolts brackets] that will also go. I do not want to part out , would like to sell as a complete package. located in westminster co 80021...
1979 FJ 40 in NC**********Not for sale any longer*****
********well I've decided not to sell the cruiser. I just can't let her go.***********
Well it's with a heavy heart I've decided to sell my 40. The wife and I have a baby on the way and I'll be looking to invest in an 80. I am sure I'll have another 40 later down the road, but for now this is the right thing to do. Details below:
1979 Toyota Landcruiser FJ 40 4x4
4.2 Liter inline 6 Cyl 135 HP
4 spd manual transmission
Color: Alpine white
4 wheel disc brake conversion
6 point roll cage....slightly bent to the passenger side. cannot install the hard top, but the bikini top that I use fits fine.
OME shocks
Hell For Stout front bumper
Metal Tech nose guard and stinger...
Price drop to 11,900 CDN.
Solid rig. Everything works. Many new parts and Aqualu tud, running boards and fenders. Chev parts include pwr steering, starter, clutch, and 350 motor. SOA
Picture from local club chapter Show and Shine . . .
http://www.flickr.com/photos/tjflex/1094274753/in/set-72157601399784165/
Cheers,
Justin
Ask for more details
1980 FJ40 for sale in Massachusetts, It has many upgrades including the following:
4" TPI Suspension Lift
Shakle reversal kit, rides very smooth on road, and off
Front disc brakes and rotors new
Stock 2F Motor all seals and gaskets recently replaced
Downey 6 into 1 headers with custom Exhaust
Weber Carb
Grant Steering Wheel
Power Steering
140 AMP Alt
Optima Yellow Top Battery
Hella H4 headlights, Hella optilux Foglights
LED upgraded stock appearing Taillights and turn signals
1/4 Diamond Plate corners, tailgate, and rocker panel guards
Rhino lined tub, Marine grade carpeted interior
Conferr center console
Conferr Brush guard
Specter family sized bikini top also inculded
Custom rear toneu cover
tinted windows
It...
12/74 build date. Less than 70K miles. Mostly stock, pretty straight, fairly complete, low rust. Starts easily, runs, steers, stops (but it pulls when doing so)
Original late F engine, 4speed, but with the 3-speed gears in the "transition year" T/C. E-'68 vac advance distributer with Pertronix ignition. Downey ceramic-coated header. "New" exhaust with Flowmaster muffler. 2F valve cover, early air cleaner with K&N filter. Mechanical oil pressure and water temp gauges, voltmeter in dash.
Repadded and covered stock seats. CCOT carpet, sun visors, taillights. Overhead Tuffy console, 2 Tuffy speaker boxes bolted to the top of the wheelwells. Simpson 4-point harnesses.
$4,000 US, OBO.
Yes, I know the bezel is upside down.
1966 FJ40 rebuilt "F" engine, new weber carb, new electronic ignition system, new ditributor, new turbo exhaust/muffler system, new 32x11.50 BFG M/T on black steel wheels including spare, SOR summer top, SOR sport bar on custom front roll bar, custom front seats, storage box built into rear of bed for storage and security (does not get in way of seats) I have the hard top with all glass and hardware in excellent working order, I have original seats and jump seats. I bought it with minor surface rust, treated it and put one-stop rust killer and painted it. 4 wheel drive works great, PTO is attached but does not work, its a three on a tree and tranny works good, I just put new brakes on front and rear. Engine has less than 1000 miles on...
***SOLD***
Well I have decided or should I say the oil companies have decided for me, it is time for me to let go of one of my cruisers. I hate to do it, but 25 mpg between the two is killing the budget.
The 76 has a little bit done to it and could be really sweet with very little more done.
It has
SOA
2 inches of body lift
4 wheel disc brakes
SM420
York compressor with holding tank
High torque mini starter
Front cage
Home made version of a tera flex revolver shackle on the back
Home made rear traction bar
Power steering
Rancho RS9000 shocks 9012 size
Warn lock outs on front
Newfields
CB
Sony CD player in dash
New 35x12.50 Pro Comp Mud terrains
15x10 white wagon wheels
Hand throttle
Tach
Home made sliders
Diamond plate rockers...
Located in Bozeman, Montana
78 fj-40
great project truck
rough body
clean, solid frame
clean, strong 2F that would need minor attention to get running
resealed transmission
rebuilt transfer case
4" suspension lift
33 by 12.5 BFG all terrain tires
front disk brakes
4:11
$3500
contact matt
mcsedor@hotmail.com
970-778-2894
could get some pictures for interested buyer:)
1976 FJ40 For Sale - $2500
update - the rig is still running strong. i just replaced the clutch slave cyl with an OEM toyota one. everything else is good to go. i also checked the diffs, transfer case, and tranny fluids - all good. i also put new filler plugs on the diffs as the PO had buggered the old ones nicely. just recently took the doors off for the AC effect and like i said, running strong. all original, waiting for you to make it yours.
I bought this in June06 and just had a baby. I have only had time to drive it to work once in a while. It is not my first cruiser and I would say that if nothing else, it is all original. The PO told me that it had a head job and carb rebuild at some point and based on the work I did on my...
The Story- (every cruiser has one!)
Bought this cruiser from another cruiser head, then was sent IRAQI for a very long hot summer. Repaired the rear of the tub with 16gauge steel, and drivers floor. Rear sill also cut out and replaced with new metal. Entire front frame and clip was wire wheeled and rust stop painted and then primered, then two top coats of color. Rest of the body 3 coats. Top (white) 2 coats. Interior 2 coats. Tires are like new - painted rims white 3 coats. K&N filter, detailed engine bay, polished valve cover.
Great running cruiser -- will go anywhere. Great daily driver, off-road vehicle
Engine starts and runs great -- does not burn oil.
Carb rebuilt last month
Water pump replaced last week...
1971 stock 40 , i have to many projects so it need to go i was told the motor had a blown head gasket i replaced the head but its still having problems i drove it and the drive train seems to be working fine, i do not have doors or a hard top for it, but i will throw in another F-motor i picked and and was told it ran fine when they pulled the motor, the body is solid with cruiser rust in the back but not bad i was going to put this motor in it and then sell it but the more time i put into it the more it will cost later $ 2500.00 and i have a few other things to throw in with the deal. Thanks
D'animal saw this on his way through MO and turned me onto it so I could help out anyone who might be interested.
The year is unknown but Dan said late 60s and I don't know the difference....I forgot to ask the owner.
The truck is formerly an Oregon cruiser that was owned by a woman who DD it before she sold it due to marriage.
No rust.
Seems to be almost completely stock.
Owner just doesn't have time to drive it.
He said something about $8,000 for it.
Contact info:
Alan C
800-222-4004
Flying A Motorsports
Cuba, MO
flyinga@fidnet.com
The cruiser is about 45 minutes away from me and if someone is really interested but unable to check the truck out I can go take a bunch of pictures and stuff like that.
Pictures...
Thread Filter
Latest posts
-
-
-
-
-
-
-
-
-
-
-
-
Build Do I need to buy a flat bill now? Chap79 Tacoma Build- Latest: OffRoadScott
Share this page
