replacing all tire rod end, center arm, oem stabilizer. and put in Trollholecarb 
What have you done to your Land Cruiser this week? (81 Viewers)
- Thread starter IH8MUD
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
......
Put a new rebuilt waterpump in the 45, filled the radiator...no leak.
Checked the toe-in on the blue 55 with a tape measure and adjusted the clutch pedal down some.
Re-attached the RTT to the Black Pig, it was loosening up. Checked the oil on the Black Pig too.
Checked the toe-in on the blue 55 with a tape measure and adjusted the clutch pedal down some.
Re-attached the RTT to the Black Pig, it was loosening up. Checked the oil on the Black Pig too.
drove carefully
i put on 33bfg km2 but the venders will hit in hughe holes and going 50mph over sleeping policemen.
i had 29 inch tires on and realy miss the acceleration and jumpy niss and torq of my little 2b engine.
going to the body shop tomorow after we install a 24volt vdo radio system.
Mine is from japan also like the 40 above so im thinking about how to keep the flared venders
have a good day guys.
i put on 33bfg km2 but the venders will hit in hughe holes and going 50mph over sleeping policemen.
i had 29 inch tires on and realy miss the acceleration and jumpy niss and torq of my little 2b engine.
going to the body shop tomorow after we install a 24volt vdo radio system.
Mine is from japan also like the 40 above so im thinking about how to keep the flared venders
have a good day guys.
ctm7840 said:
Awesome...your gonna love it, I know I do! CONGRATS!
-Daniel
Sent from deep in the mountains of Honduras using only sticks and rocks.
toyotaboy92
SILVER Star
Tested out my new Trollhole carb with a drive up the hill to my folks house at 8,500ft. It is the single best purchase I have made for the ole' girl!!
Installed the headunit...
Still gotta fit the speakers and I know just where to put them
Still gotta fit the speakers and I know just where to put them
ElHefe
SILVER Star
hatman406080 said:replacing all tire rod end, center arm, oem stabilizer. and put in Trollholecarb
toyotaboy92 said:
You're both going to love those THCs.
I replaced the volatge regualtor with no success this weekend. Still getting 17 volts out of alternator. Battery was starting to boil. I bypassed the "two battery switch as i only have one battery" and it reduced voltage down to 12.5. I can't tell if if is actaully charging my battery or not. It seems low. I dont see any drain with stereo lights and fan on however . Hoping it is ok. May replace the alternator with new internal regulated version. Any suggestions on part# to easy install? I also replaced ignition wiring harness in sterring column. Made a huge difference.
Installed under driver seat subwoofer box and amp rack. Sweet downward firing install with everything hidden. Great results on sound.
In process of final install of electronic hoist in garage to add, remove, store hard top with front and ambulance door storage integrated into lift. I needed some more room in garage.
Installed under driver seat subwoofer box and amp rack. Sweet downward firing install with everything hidden. Great results on sound.
In process of final install of electronic hoist in garage to add, remove, store hard top with front and ambulance door storage integrated into lift. I needed some more room in garage.
Also passed emissions, good for another year!
- I'll have to smog mine in two weeks, not looking forward 
ElHefe
SILVER Star
40's rock said:
Cool rig! If only you were driving back up soon, LOL. My 40 could use a ride
Millardo
'72 FJ40
Photo Op
I took a photo this week for the September/October issue of Toyota Trails magazine which is featuring my 10 year restoration project...
3/72 FJ40.
[/ATTACH]
I took a photo this week for the September/October issue of Toyota Trails magazine which is featuring my 10 year restoration project...
3/72 FJ40.
[/ATTACH]
I think it looks better without the lights on - but that's just me 
just finished mounting a first gen pto gear box, cut a hole in the trans tunnel for the lever (luckily, right location, first cut ) used about a can of pb blaster on the winch, was seized, now slides back and forth with ease (another ) also, removed the old trash cable (had 120'+)...all with help from my pop. began looking for a matching (old style) hood hinge (pass. side is from a later model 40)
) used about a can of pb blaster on the winch, was seized, now slides back and forth with ease (another ) also, removed the old trash cable (had 120'+)...all with help from my pop. began looking for a matching (old style) hood hinge (pass. side is from a later model 40)
ElHefe
SILVER Star
Millardo said:
Your rig is bananas. I can't wait to read the piece.
Millardo said:
Beautiful pics. Your spare is same color as truck?
Cool rig! If only you were driving back up soon, LOL. My 40 could use a ride
NOPE...no way...no how...I am not making that drive again. Next time I drive that far will be MOAB. It does drive well though...
