What have you done to your Land Cruiser this week? (36 Viewers)

[Buffchief]

How many cans of adhesive did you use?

Two 3M

 

[Buffchief]

Two 3M

The fiberglass absorbs some since it's porous so I added extra to have good coverage. Make sure you let it get nice and tacky or it will pull out on the corners and sides...

 

[Skreddy]

I did as well. Came in Thursday and it's installed. Seems to be great quality . The rear corners radius is made into it. Still a bugger to get them right, like wrapping paper around a football! My corners have some wrinkles but ... It's better than what I had. I'm sure someone more skilled than me could make it work.

View attachment 3923733

View attachment 3923734

Looks great!

I’ve done a few of these and there is definitely a “sweet spot” where they fit the best. When I do them, I find that spot then fold the front in half to the back and mark a reference line on the underside of the headliner and the hardtop. I do a “T” so you know center side to side and front to back, then slowly roll the front half back toward the front and mark that center side to side line more. Repeat for the back. May be unneeded but it has helped me keep them where I wanted.

 

[Skreddy]

View attachment 3923557

View attachment 3923558

View attachment 3923559

Do you have all the bolts loose? Cap to top sides, top sides to tub, etc. Then, loosen the windshield hold down knobs a little. If the top was completely disassembled, it’s a dance to get it right and usually a bit of compromise all the way around. I usually start at the windshield.

 

[patherfinderjake]

Finished the sound deadening on the rear floorboard and driver side. Still need to spray and roll the inside of the doors and anyplace else I can reach.

 

[horzepower]

HJ45 3.6 Diesel 1980
Malaysia

Add timber rack ie radio, switches etc as not to meddle the original front panel...try to adjust the height, but the timber rack still a bit low and can be seen front from front windscreen...

 

[mdsims]

Quick question, real time FAQ help: for those that bend and flare their own brake lines, what flare tool have you had good luck with?

 

[Mr. Green]

This one(~$150): like it because it’s fast and keeps the steps organized. Cheaper is available but not my preference.

 

[sleepycruiser]

Can someone please measure to the center of the bolt for the side hood padding? Mine doesn’t have those and I want to install them. Hopefully that makes sense.

 

[Flatlanderfj40]

Can someone please measure to the center of the bolt for the side hood padding? Mine doesn’t have those and I want to install them. Hopefully that makes sense.

View attachment 3924345

 

[sleepycruiser]

View attachment 3924394

Thank you. I got a little hasty and drilled at 2.5” anyway…appreciate this confirming!

 

[Jdc1]

Quick question, real time FAQ help: for those that bend and flare their own brake lines, what flare tool have you had good luck with?

This one(~$150): like it because it’s fast and keeps the steps organized. Cheaper is available but not my preference.


View attachment 3924304

The bench top flare tool is great, I just picked one up last week. This also saved the day last week for splicing in a prop valve that used a bubble flare-

Summit Racing SUM-900318 Summit Racing™ On-Car Flaring Tools | Summit Racing

Free Shipping - Summit Racing™ On-Car Flaring Tools with qualifying orders of $109. Shop Flaring Tools at Summit Racing.

www.summitracing.com

 

[trainbufftony]

Any flare tool that you use is going to require some practice.
I use a cheap manual one and ive done entire cars with it. I get paid hourly so fast tools dont make me more money.
I think i got mine off the Mac truck but its an OTC kit...

 

[1911]

Quick question, real time FAQ help: for those that bend and flare their own brake lines, what flare tool have you had good luck with?

https://www.amazon.com/Capri-Tools-Double-Flaring-CP21110-316/dp/B0859QMSNX/ref=sr_1_4?sr=8-4

Works great, easy to use in small/confined spaces.

Edited to add: Same as @Jdc1 posted.

For bending, any generic tubing bender.

 

[Pighead]

Pulled my low-miles sparkplugs just to see, cleaned 'em up with the dremel wire wheel.
Adjusted valves while gluing on a new valve cover gasket. Then put it together again.

 

[archie73]

I doubt I will ever take the top off again but was thinking of getting a tail gate panel and just take the doors off for summer rides.

Funny, I’m not sure I’ll ever put it back on… unless it needs to be stored outside over the winter to make room for another project…

 

[Beehanger]

Pulled my low-miles sparkplugs just to see, cleaned 'em up with the dremel wire wheel.
Adjusted valves while gluing on a new valve cover gasket. Then put it together again.

View attachment 3924852

View attachment 3924853

View attachment 3924854

View attachment 3924856

View attachment 3924857

Where can one find this gasket?

 

[charliemeyer007]

Gasket, Valve Cover, Toyota Land Cruiser

 

[Buffchief]

View attachment 3923557

View attachment 3923558

View attachment 3923559

Is there supposed to be a gap or fit tight against the frame?

 

[pb4ugo]

Tight against the frame.