Is that some sort of trunk carpet or something. I'm thinking of doing mine this way too. I will insulate a little, reduce noise and look good.
What have you done to your Land Cruiser this week? (47 Viewers)
- Thread starter IH8MUD
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
OlYellr
SILVER Star
Nice LV too - like seeing a blue-eyed unicorn.
I did the same thing, Home Depot indoor/outdoor carpet. It was like $20, cheap enough to experiment. I also put some Silas sound deadoning material under the carpet, really does make a difference.
1911
chupacabra
My wife finds it in Aldi (6x9ft, Earthkind area rug, indoor/outdoor) priced at $18
Purchased two cans R12.
addendum: may have jumped the gun, local old timey mechanic told me I should've purchased 134 for my '83. Guess I'll wait for the truck to be delivered next week-ish to see what the Saudi spec freon is.
addendum: may have jumped the gun, local old timey mechanic told me I should've purchased 134 for my '83. Guess I'll wait for the truck to be delivered next week-ish to see what the Saudi spec freon is.
Last edited:
MAR FJ40
SILVER Star
Had the rear jump seats blasted and painted. I installed the cruiser corp seat covers. Special ordered black leather. I'm happy with how they turned out.
Looks good.
cruiserkev
3 decades in the same FJ40
I did this too. Great project for a lot less than what an OEM headliner costs. Absorbs noise and insulates better as well.
New watertemp gauge, from Autometer. Has a smaller sweep than the old one, which I like. I don't really need a gauge that goes to 280, I'll probably stop if it hits 240.
Plumbed it into the waterpump so I can compare and contrast it with the head watertemp reading.
Just started it up for the first time, to check for leaks and stuff. Brought it up to temp to see if it worked. New gauge, on the right, warms up quicker but they both settled on 180 after a while at idle
Plumbed it into the waterpump so I can compare and contrast it with the head watertemp reading.
Just started it up for the first time, to check for leaks and stuff. Brought it up to temp to see if it worked. New gauge, on the right, warms up quicker but they both settled on 180 after a while at idle
MAR FJ40
SILVER Star
Looking Good!
POPO AGIE
SILVER Star
Installed fittings and made up and ran the LP hose from the steering box to the cooler and the to the reservoir.
Banjo fitting and bolt for the pump output.
Connected the steering box to the cooler
Connection from the cooler
Connected to the reservoir
I like these fittings much better then the push locks. I have fittings coming for the HP hose and will replace the suction line with one from the reservoir to the pump.
Banjo fitting and bolt for the pump output.
Connected the steering box to the cooler
Connection from the cooler
Connected to the reservoir
I like these fittings much better then the push locks. I have fittings coming for the HP hose and will replace the suction line with one from the reservoir to the pump.
Where did you get the new lenses from?
I used the blaster stuff last fall on my sequoia to try and keep some of the salt at bay over the winter here up in Alaska. It comes out of the can thick. I looked at it recently and it was still soaked on there really well. Seems to do the job.
brian
SILVER Star
A little upholstery
sleepycruiser
I will get by….I will survive -Touch of Grey LC200
Cruiser Corps covers? Mine just came in today. What foam and wire did you use??
