What have you done to your Land Cruiser this week? (21 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

A wheel spacer is the easiest solution. I've got a couple beat up ones that would be onthe way to becoming beer cans it it wasn't for using them as spare tire spacers.

Cheap 1" spacers off Amazon work great.
IMG_20190822_190232324.jpg
IMG_20200920_144457794.jpg
 
Just doing the usual things this week ..

A little of this and a little of that .





1674916120524.jpeg



A8FA72EA-3EF2-41E1-9656-E9B9ACBD1A15.jpeg
EF11B204-0293-4DCB-89D9-B7AC516D8535.jpeg
4D9FDCCD-AE23-4E28-9F27-368D70B38A91.jpeg
83E0EB3D-717D-440A-B865-557B9D22AB26.jpeg
19E6B2AA-89C7-42FA-834E-7C90641C4AFC.jpeg
A5B522BB-8F27-48AB-A4DF-3215A5ACB3BD.jpeg
7F065F3E-41F1-48A3-852C-E8ADA4961DCC.jpeg
E6CA5239-3C53-41B5-9879-4B5F91C22174.jpeg
F2DFACCC-60C6-4575-A8C7-FE90DBC5FB3D.jpeg
 
Watching the snow pile up on the hibernating 40.
 
Shake down period is going well. Took it to a braai at my uncles and had to enjoy the view

20230128_144227.jpg

20230128_144402.jpg



And an artsy one for those who like
IMG_20230129_071308220_Daryl Feril.jpg
 
Started this project over 5 years ago… had to dig out the house caulking that PO used and replace with self leveling sealer
B9EA5C4E-7622-41AC-95A9-9E37128BB310.jpeg


Top sanded and ready…
39C016CC-ACE4-4755-AB5E-40A1BDA3874B.jpeg


2 coats of Rustoleum boat primer and 3 coats of paint…
6E241A89-57F2-408A-B2AC-228D5EF68096.jpeg

B5F3A00E-9A1C-4E24-8466-BE969735565E.jpeg

Spraying woulda been better but the foam roller did pretty good……. I haven’t had the top on for quite a while so I’m looking forward to putting it back together - hopefully I’ll remember what goes where! :cheers:
 
Last edited:
Started this project over 5 years ago… had to dig out the house caulking that PO used and replace with self leveling sealer
View attachment 3233060

Top sanded and ready…
View attachment 3233061

2 coats of Rustoleum boat primer and 3 coats of paint…
View attachment 3233062
View attachment 3233063
Spraying woulda been better but the foam roller did pretty good……. I haven’t had the top on for quite a while so I’m looking forward to putting it back together - hopefully I’ll remember what goes where! :cheers:
What kind of paint did you go with?
 
View attachment 3233838Cant remember If I posted this or not. But I got a bunch of photos finally scanned and developed. This photo from of the salt wagon pre sill replacement! I took this photo with my hasselblad and the 80mm planar. film: Fuji Pro400H

Toyota Trails stuff there!
 
I am considering the same. Did you tip it after rolling?
I did not…. It didn’t seem to have air bubbles so I skipped that
I may wet sand and apply one last coat… mostly because I have enough paint!
 

Users who are viewing this thread

Back
Top Bottom