I am getting one to try out. Heard they are the bees knees.Yessir, out of a s70 with the relay system as well. Here’s a link to more info
Volvo Electric Cooling Fan
www.therangerstation.com
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
I am getting one to try out. Heard they are the bees knees.Yessir, out of a s70 with the relay system as well. Here’s a link to more info
Volvo Electric Cooling Fan
www.therangerstation.com
Pretty sure that’s the same 2 speed Volvo fan I have on my V8 swapped 40. Works great.Worked on a fan shroud for my 2uz swap. Had to offset it a little too since it was within a 1/2” of the old fan pulley.
Wished I had left enough room for a mechanical fan, but hindsight is 20/20.
View attachment 3009662
Got a pic of your Sanderson headers installed? I’m running some Sanderson S10 headers.Had an exhaust leak on my Sanderson headers attached to a 383 stroker. I followed the directions sent with the headers, "RTV black, wait till it dries." Maybe not circling back and retorquing caused the blow out. Replaced with Remflex gaskets. Assuming this problem will not resurface. The only oil dipstick that works with the Sanderson headers is the Lokar flex tube dipstick. Unfortunately, my inner plastic melted and pushed the dip stick in so hard, broke off the tip. Now I have a new Lokar dipstick at a better angle, hopes this works.
The exhaust leak coupled with a faulty IAC motor has mode the sniper impossible to tune. I dyno'd it at 210 hp. Hoping the new IAC motor and fixed exhaust leak will help with tuning.
Started the twin stick transfer case install, hoping to finish this week.
Too close for comfort!I got mine out of the garage before the fire came. We got lucky as they saved the house minus a few windows and lots of smoke. Blessed.View attachment 3011601
View attachment 3011615
Wow... so glad you dodged the bullet! Are you in NM?I got mine out of the garage before the fire came. We got lucky as they saved the house minus a few windows and lots of smoke. Blessed.View attachment 3011601
View attachment 3011615
Thats some scary s*** their !!!!I got mine out of the garage before the fire came. We got lucky as they saved the house minus a few windows and lots of smoke. Blessed.View attachment 3011601
View attachment 3011615
He's the best. Very knowledgeable and has all the unicorn parts. He had saved me on more than 1 project.Today I ran across a guy you know here as @ToyotaMatt… was a simple question as my FJ40 arrived with a bad alternator and voltage regulator. I ‘pm’ed” him a quick note and question… what a fabulous reply I’d gotten and our discussion led to my finding perfect replacement parts which he is sending out to me..
I am so new to the IH8MUD. Not new to Land Cruisers as it was my first new car in 1974 when I was 21. Lots of time has gone by since but IH8MUD has been responsible for my
1.) finding a good FJ40 (ok. 3000 miles away)
2.) meeting INCREDIBLY HELPFUL people here
3.) finding a bunch of parts I thought could be hard to find
4.) re-developing my mechanical skills
5.) getting my last hoorah in my aging life and enjoying the heck out of it
so, the outside world seems to have faded away for the moment and created enthusiasm I ain’t seen in a few years….
Thanks
View attachment 3011521
@ToyotaMatt has pulled through every time I have called him and very thorough to say the least. He comes up with some unique stuff. Never disappoints. And very knowledgeable.Today I ran across a guy you know here as @ToyotaMatt… was a simple question as my FJ40 arrived with a bad alternator and voltage regulator. I ‘pm’ed” him a quick note and question… what a fabulous reply I’d gotten and our discussion led to my finding perfect replacement parts which he is sending out to me..
I am so new to the IH8MUD. Not new to Land Cruisers as it was my first new car in 1974 when I was 21. Lots of time has gone by since but IH8MUD has been responsible for my
1.) finding a good FJ40 (ok. 3000 miles away)
2.) meeting INCREDIBLY HELPFUL people here
3.) finding a bunch of parts I thought could be hard to find
4.) re-developing my mechanical skills
5.) getting my last hoorah in my aging life and enjoying the heck out of it
so, the outside world seems to have faded away for the moment and created enthusiasm I ain’t seen in a few years….
Thanks
View attachment 3011521
X10Today I ran across a guy you know here as @ToyotaMatt… was a simple question as my FJ40 arrived with a bad alternator and voltage regulator. I ‘pm’ed” him a quick note and question… what a fabulous reply I’d gotten and our discussion led to my finding perfect replacement parts which he is sending out to me..
I am so new to the IH8MUD. Not new to Land Cruisers as it was my first new car in 1974 when I was 21. Lots of time has gone by since but IH8MUD has been responsible for my
1.) finding a good FJ40 (ok. 3000 miles away)
2.) meeting INCREDIBLY HELPFUL people here
3.) finding a bunch of parts I thought could be hard to find
4.) re-developing my mechanical skills
5.) getting my last hoorah in my aging life and enjoying the heck out of it
so, the outside world seems to have faded away for the moment and created enthusiasm I ain’t seen in a few years….
Thanks
View attachment 3011521