- Thread starter
- #81
TPI assbuster kit circa 1997
Builds The KY40 - Tilda Bogue Service Station
- Thread starter wngrog
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #83
- Thread starter
- #84
If it does not have an emergency brake attached to it, I don't mess with drum brakes.
JTO kit
JTO kit
jesus888
SILVER Star
I really wish we could include the seller in this thread… kinda like a “here you go, this thread is all about documenting what I’m doing to the sweet rig you sold me… so you can follow along!” #alsoGFY
I mean that’s assuming the rig was sold without disclosing the junky wiring, the lack of shock bushings, and other delights you’ve found and are gonna find…
- Thread starter
- #86
Yeah. The seller is a dirt bag. Very creatively left out all of this s*** in his description
My guy is a humble, hard working dude that admitted that he ****ed up buying it unseen.
He was over promised, over charged and basically screwed to a wall.
We are making it right.
phishtaco
Cincinnati
How was the JTO kit compared to the TSMs you’ve installed previously?
- Thread starter
- #88
Fine. Basically the same thing for 1/2 the price. That kit has just gotten too expensive.
- Thread starter
- #90
Nope. All good.
- Thread starter
- #91
Changed the oil. 20/50 Valvoline with Zinc.
New Denso plugs.
Dissy installed.
PCV
Redline carb base
New battery tray and holder.
Just sticking s*** back on as I have it
New Denso plugs.
Dissy installed.
PCV
Redline carb base
New battery tray and holder.
Just sticking s*** back on as I have it
- Thread starter
- #93
Aight. More parts came in. Jeep mirror heads are gone for OEM
Oil cap
Battery. The genius from before had some oddball that won't fit in the stock tray
Koito H4s and a nice used OEM bumper makes the front look so much better
Hammered out the old rounded off 24mm dif drain and fill plugs and drained the jet black 90wt out and reinstalled hex plugs and new gaskets
Oil cap
Battery. The genius from before had some oddball that won't fit in the stock tray
Koito H4s and a nice used OEM bumper makes the front look so much better
Hammered out the old rounded off 24mm dif drain and fill plugs and drained the jet black 90wt out and reinstalled hex plugs and new gaskets
Catching Neutral
GOLD Star
The patina on that bezel is perfect.
- Thread starter
- #95
Shocked the PO did not spray bedliner on it
- Thread starter
- #96
Clutch in and bled.
Brake lines have a drip or two under pressure so I undid it all and added some locktite 567 to the threads. I'm gonna let that sit up overnight and bleed them out tomorrow.
Was supposed to get a pallet from 4Plus today so I could get the swingout on but the turds did not show up.
May have to start wiring tomorrow.
Brake lines have a drip or two under pressure so I undid it all and added some locktite 567 to the threads. I'm gonna let that sit up overnight and bleed them out tomorrow.
Was supposed to get a pallet from 4Plus today so I could get the swingout on but the turds did not show up.
May have to start wiring tomorrow.
whitey45
SILVER Star
You cant #uck with the oem look, designers nailed it from the get go
nice work as always Nolen! Cheers its friday
!
nice work as always Nolen! Cheers its friday!
Looking good!
- Thread starter
- #99
Pallet DID come in so I grabbed a breakfast burger and then grabbed the pallet.
Even got the tires in ....
And it's on. Nice and tight.
The Wizard is in the house mating the new header to the old exhaust
Even got the tires in ....
And it's on. Nice and tight.
The Wizard is in the house mating the new header to the old exhaust
that rear caliper flex line needs a tab welded to the diff, so its not flexing the metal line, otherwise they'll fatigue and crack.
