Take a prybar and turn the flywheel using the bellhousing as leverage. Go both directions back and forth. Fwiw, I had a seized f engine that required a 6 foot cheater bar to break free!!!( I highly doubt the trans is the issue) also diesel fuel...
I ran into Stealth, Gaia and Vader again. They put the word out on Guthook, a satellite-friendly hiking app, for everyone to keep an eye out for my bag. They also suggested that I NOT try to walk out to the east, to Jawbone Canyon. Interesting...
Not that we were going for “period correct” but it just seemed like the right move.
The tinted bed liner had already started to fade to pink and even though now it still looks a bit different it’s a lot closer and the paint over liner will stay...
Update! Bumper had been riding around in the parts hauler prius for a week but finally made it to @theSherpa 's shop for some test fitting. Hole drilling next. I had to bail after getting some wires and spots marked for the holes. Will resume...
I kept this under wraps last couple of years basically out of embarrassment of becoming like many of you other degenerates with too many cruisers ;) kidding of course, so glad we all have each other...
I bought John aka @Living in the Past pair...
Thanks fellas. Spent the last four months licence free and with the burning desire for fuel injection. Picked up a good running Holden 5.0L V8 extremely cheap [including standalone ECU so it runs of my OE 1970 ignition barrel] and due to the same...
I over heated my F135 back in about 1988. The overheat was so bad that several of the valves were frozen in their respective guides (which is probably what happened to you). I can't remember, but I may have had a couple of bent push rods. I...
It was a running and driving truck. I am the hillbillie! as I had the axles from another rig with good brakes, so I threw them in. It had the under bed spare. Those are not oem taillights, but are in the correct location. I dont recall if it had...
I thought of you when Andy called me about it a few days ago. He didn’t have a price for it yet.
It looks like it should have the taillights that protrude from the bed.
Probably a stuck valve from overheating, throw some push rods in it, adjust the valves! These are non interference engines, should be fine As these are bulletproof tractor engines!
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.