PabloCruise
SILVER Star
They are only metal! (And some plastic insulation)More Brave than me! Hate wires
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
They are only metal! (And some plastic insulation)More Brave than me! Hate wires
Not to be confused with...if you wanna go for broke with an over the top system, add this in there
She looks like she talks a lot...
Not sure if y'all have ever seen this one, she has a theory that men just want women to talk a little less. Very funny...You have watch out for those chatty womens.
thats excactly what i did.The only Toyota I'd trade my Pig for.
I like this idea, but instead of the clamp to hold down the weather pack connectors why not use a bulkhead connector? I'm pretty sure you can find weather pack or metri pack style bulkhead connectors at places like Waytek
NiceI like this idea, but instead of the clamp to hold down the weather pack connectors why not use a bulkhead connector?
Was hoping to also run a FJ62/FJ80 style air cleaner housing on the passenger side. Not sure if it’s going to work out or not. So far, the driver side is still open and hasn’t been planned out yet.Sure you have already considered, but are the cold air in and coolant reservoir also on that side - thinking about space...
I haven't seen a 90, but that doesn't mean they don't exist. Either top mount or bend a section of that plate to suite the desired location or where space permitsNice
Where are you thinking the bulkhead should come through? From the bottom to the top or out the side of a bent edge? A 90° bulkhead fitting would work great if the fixed side was coming through the bottom of the plate.
That area gets pretty tight. I hoped to do that too, but no bueno with the AC compressor and radiatorWas hoping to also run a FJ62/FJ80 style air cleaner housing on the passenger side. Not sure if it’s going to work out or not. So far, the driver side is still open and hasn’t been planned out yet.