was it one of those aftermarket black box cruise controls? I had one in an old pickup and while it didnt do what you describe, it would work once out of every 10 times you tried it ha
What did you do with your 60 this weekend? (41 Viewers)
- Thread starter MrMoMo
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
When this engine swap makes more progress it's on the list of things to do.
Mine was just ok. There wasn't anything that set it apart from my 60 that I couldn't just add to the 60. And the tacoma feels weird for tall drivers, I felt like my head was in the ceiling of the truck.
By the time I lifted it, put on a bed cover, etc I would've just built what the 60 was already.
Attended SSS 2023 in Land Between the Lakes. Events/Trails - SSS (Southern Swine Soirée) 2023 - Land Between the Lakes KY. Let’s go! - https://forum.ih8mud.com/threads/sss-southern-swine-soiree-2023-land-between-the-lakes-ky-lets-go.1314685/
Camped out with other Cruiser folks, drove forest service roads, drove trails in the off road park, endured a few annoying side by sides. Watched a Corolla Alltrac take on everything the Cruisers were doing https://forum.ih8mud.com/threads/i-just-bought-a-corolla-alltrac.1320594/
Camped out with other Cruiser folks, drove forest service roads, drove trails in the off road park, endured a few annoying side by sides. Watched a Corolla Alltrac take on everything the Cruisers were doing https://forum.ih8mud.com/threads/i-just-bought-a-corolla-alltrac.1320594/
Those alltrac corrolas and their tercel 4x4 predecessors were no joke 
Turkey bay is Sxs heaven these days unfortunately. Its almost not even fun in a normal 4x4 now because its been so rutted up by the sxs
I too went to the Swine Soiree and had an excellent time, and got to meet some great folks and got to see some very cool rigs stretch their legs a bit. Sorry to anyone that I, my kid, or my dog may have annoyed. I look forward to annoying you all again next year.
@Thechief86 Who needs an 80 with coils when ya got flex like that? Looking good!
Skreddy
SILVER Star
New rear hatch struts. No more hitting my head.
@Skreddy Sweet work! How did you get the old struts off?
Skreddy
SILVER Star
Unscrewed the ball studs with them in the strut. New struts only came with 2 new ball studs so used a hacksaw to cut the end of the old struts to get those ball studs out and reused 1 old one from each strut. If that makes any sense.
Going to be putting some 80 axles under my truck thanks to @TRAIL TAILOR ... The 80 axles are like 4 or 5 inches wider or so than the 60 axles. I very accurately and professionally installed these flares from australia for mock up to see how theyll look. Hopefully theyll take up some of the extra width the 80 axles are going to give me. These wheels offset will pull them in as much as i can on the axle, so with the flares they should, in theory match up pretty well.
As it sits in the pics, there are 1.25 inch wheel spacers on my wheels because the wheels were bought with specs for the 80 axles that are going in so theyll stick out a little bit further than this. Hopefully not too much further.
They are just white gel coat, they need to be sanded and painted before they can be installed. Sliding cargo windows should be here any day. Just need to find a high roof to graft over and put a turbo in it and i can live my LHD V8 HJ60 dreams.
I even have the oem mud flaps for the fender flares to go on as well
As it sits in the pics, there are 1.25 inch wheel spacers on my wheels because the wheels were bought with specs for the 80 axles that are going in so theyll stick out a little bit further than this. Hopefully not too much further.
They are just white gel coat, they need to be sanded and painted before they can be installed. Sliding cargo windows should be here any day. Just need to find a high roof to graft over and put a turbo in it and i can live my LHD V8 HJ60 dreams.
I even have the oem mud flaps for the fender flares to go on as well
Last edited:
CenTXFJ60
SILVER Star
Very cool. Always like the flares on a 60
I'm in the midst of a cooling system and AC refresh. I finished up my radio install the other day, and while I had the dash out, I popped the evaporator and blower motor down and cleaned up the housings with new felt and foam. I put in a new evaporator and expansion valve.
While I was removing the suction line from the firewall, the threads pulled on the evaporator and kicked up the threads for the hose. I did a bunch of looking around on here and found a few threads that kind of contradict each other along with my end result. People in the FJ60 A/C Hoses - https://forum.ih8mud.com/threads/fj60-a-c-hoses.933917/page-2 thread are stating that hose is a m22x1.5 or m22x1.75 (no 1.75 female o ring fitting seems to exist) I took my new evap and the suction side fitting to Nebar hose and fitting in Ballard (Seattle) and talked with Bruce. We tried a 22x1.5 and found it only threaded in like 1 thread. The 1.75 pitch gauge was close but not solid but the 7/8- 14 threaded on perfectly. The last post in the thread I mentioned suggested that but there is so much more metric part numbers flying around that one might overlook the standard hose diameter.
With that detour handled, I started in on swapping the compressor, 3 new OEM belts, a new water pump, thermostat and a bunch of coolant hoses that were ballooned and screwed up from using worm clamps. When I pulled my thermostat, I got a gooey surprise in the form of gelling and corrosion in the thermostat housing. The upper o ring was also decimated.
I cleaned all of that out with a wire brush and will toss it in my ultrasonic cleaner later today. Here's how it looks after the brushing. I think this came from using hard water and the car sitting for years at a time? Low quality coolant? I'm not 100% on why. The water pump block hole looked fine, and so did the lower thermostat housing portion.
I'm hoping to get it all back together by Monday but we'll see what the weekend has in store as far as family stuff.
While I was removing the suction line from the firewall, the threads pulled on the evaporator and kicked up the threads for the hose. I did a bunch of looking around on here and found a few threads that kind of contradict each other along with my end result. People in the FJ60 A/C Hoses - https://forum.ih8mud.com/threads/fj60-a-c-hoses.933917/page-2 thread are stating that hose is a m22x1.5 or m22x1.75 (no 1.75 female o ring fitting seems to exist) I took my new evap and the suction side fitting to Nebar hose and fitting in Ballard (Seattle) and talked with Bruce. We tried a 22x1.5 and found it only threaded in like 1 thread. The 1.75 pitch gauge was close but not solid but the 7/8- 14 threaded on perfectly. The last post in the thread I mentioned suggested that but there is so much more metric part numbers flying around that one might overlook the standard hose diameter.
With that detour handled, I started in on swapping the compressor, 3 new OEM belts, a new water pump, thermostat and a bunch of coolant hoses that were ballooned and screwed up from using worm clamps. When I pulled my thermostat, I got a gooey surprise in the form of gelling and corrosion in the thermostat housing. The upper o ring was also decimated.
I cleaned all of that out with a wire brush and will toss it in my ultrasonic cleaner later today. Here's how it looks after the brushing. I think this came from using hard water and the car sitting for years at a time? Low quality coolant? I'm not 100% on why. The water pump block hole looked fine, and so did the lower thermostat housing portion.
I'm hoping to get it all back together by Monday but we'll see what the weekend has in store as far as family stuff.
No better time to do it than all at once. You get fresh transfer case rebuild too.
batthewmrown
SILVER Star
Had a '84 SR5 Terc and can confirm, that thing was an absolute beast.Those alltrac corrolas and their tercel 4x4 predecessors were no joke
Dude I had no idea you had one of these. Should have kept it…
Like flares too! Care to share source?
