I wonder if the knob for the valve is still available from Toyota?
What did you do with your 60 this weekend? (7 Viewers)
- Thread starter MrMoMo
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
I wonder if the knob for the valve is still available from Toyota?
A good use of the rear heater is to thaw a jar of peanut butter on a cold winter day.
I'll keep that in mind. Seems like it would also be good to keep the ski boots warm until you arrive at the mountain.
How do I add a photo to this thread ?
g-man
SILVER Star
hit the "upload file" button next to the "post reply" button. browse your photos and double click the ones you want to add.
Took a 2F to the machine shop so I can bring mine back to glory
Ah ha, thanks for that g-man.
Fuel box for back swing arm pictures.
Completed the brace for the little table off the side today, along with mounting tent, awning, sub-woofer box incorporated in the drawer system.
Fuel box for back swing arm pictures.
Completed the brace for the little table off the side today, along with mounting tent, awning, sub-woofer box incorporated in the drawer system.
FINALLY got my new windscreen put in!! Including a new aftermarket non-chrome-strip gasket.... Now to get the sun visors, speakers, windscreen wipers etc back in tomorrow morning, then back on the road!! Yay!!!
Got out and kicked up some trail dust and made a little diesel exhaust.
Having some cooling issues with the 60 running a little hot. But only when blasting AC and slowing down/idling. No overheating on highway driving with AC on. Fan clutch was the only thing on the cooling system that we didn't replace during the cooling system overhaul, so it's looking to be the likely culprit.
Having some cooling issues with the 60 running a little hot. But only when blasting AC and slowing down/idling. No overheating on highway driving with AC on. Fan clutch was the only thing on the cooling system that we didn't replace during the cooling system overhaul, so it's looking to be the likely culprit.
MiyamotoMusashi
GOLD Star
@Aloha Jen
Went back home to Honolulu for some grad parties recently and was keeping an eye out for your Cruiser. Think I saw it on Ward Ave?
Unless there's more than one of the same color! Either way it looked good!
Went back home to Honolulu for some grad parties recently and was keeping an eye out for your Cruiser. Think I saw it on Ward Ave?
Unless there's more than one of the same color! Either way it looked good!
Thanks, I will look into that. I do have a small bottle of the 10K silicone oil, so may try to see if that fixes it before buying a new one.
LAMBCRUSHER
SILVER Star
10K is good. I'm about 10.6k with a lower stat setting. it runs a lot, but I haven't felt like it's hurt anything, and I'm not afraid of the heat anymore...if you can't reset the timing, slightly more csk is what I understand the AZ guys are doing to keep the condensers cooled at stoplights in the desert heat. I have heard as much as 15K, but think somewhere between 10 and 12 is just fine for where I'm at. 105*+ summers...
Ordered this (20% off)
LAMBCRUSHER
SILVER Star
MOAR PLEEZ
Affordable Fuel Injection
LAMBCRUSHER
SILVER Star
yep, thanks!
I went after some water leaks, and resealed the front cowl area behind the fenders. Pretty straight forward job, just time consuming.
Hope this fixes it. Pretty much no sealer left on either side.
Hope this fixes it. Pretty much no sealer left on either side.
red66toy
Supporting Vendor
I need to do that. How was taking the fender off?
