Freds40 builds a 60
- Thread starter freds40
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
rusty_tlc
Dain Bramaged Member
The ports on my FJ40 are still capped off, three years after the PSC PS conversion.
I'm not sure what the cylinder walls look like so I figure I'll keep it and run it if it's good.
If you have a week or 2 when your 60 will be down, bring me your box and I'll tap it for ya. Won't take me long to do but I'll work it in when I have time. Then worst case you can just plug the holes until we have time to install the ram.
When are you going to bring that truck up here and play on the Rubicon?
Or better you could join us for Fordyce this fall.
It's like Dusy on steroids but a lot shorter.
rusty_tlc
Dain Bramaged Member
- Thread starter
- #724
The ports on my FJ40 are still capped off, three years after the PSC PS conversion.
When are you going to bring that truck up here and play on the Rubicon?
Or better you could join us for Fordyce this fall.
Hey Dan. I made it up to Rubicon twice last year. Been wanting to run Fordyce for a while but never made it happen. One year I was heading out but it was raining down here and sleeting up there. I figured it wasn't worth the treck that time.
I should be back on the Rubicon for Rubithon so hopefully I'll catch you then.
rusty_tlc
Dain Bramaged Member
cough...cough
Man, this thing would perfect with some other trans besides that 465. Have you ever thought about an H55? All the super cool trucks run them.
Man, this thing would perfect with some other trans besides that 465. Have you ever thought about an H55? All the super cool trucks run them.
Man, this thing would perfect with some other trans besides that 465. Have you ever thought about an H55? All the super cool trucks run them.
Let me guess, H55 > 4.7 Toybox > 2.27 split case > 4.88's?
Man, this thing would perfect with some other trans besides that 465. Have you ever thought about an H55? All the super cool trucks run them.
im looking for a 465, and a 203... in no hurry for it if it may be coming out, could also use the 1F bellhousing im sure you have it attached to...
Just throwin that out there.
- Thread starter
- #729
Man, this thing would perfect with some other trans besides that 465. Have you ever thought about an H55? All the super cool trucks run them.
Ya pud.
TLC Norway
woodwelder
Well, now i've read this whole thread, and never have i learned so much trough a sixpack and my laptop...
Amazing story you got here, doing all kinds of cool mods, wheeling with family and so on.
I really enjoyed reading this, not just because i like the 60 big, wide and low, but also how you seem to make the biggest challenges into neat, well-executed projects... and that rear FF...won't start bragging.
Keep posting, love the progress!
damn, i also figured now i have to do all this and and and add 39,5's to float some snow with my sixty...
Amazing story you got here, doing all kinds of cool mods, wheeling with family and so on.
I really enjoyed reading this, not just because i like the 60 big, wide and low, but also how you seem to make the biggest challenges into neat, well-executed projects... and that rear FF...won't start bragging.
Keep posting, love the progress!
damn, i also figured now i have to do all this and and and add 39,5's to float some snow with my sixty...
Ya pud.
You love it
you get my heated seat installed yet... Get ta crackin, clocks tickin
Man, my rig would perfect with some other trans besides this automatic. I should have put in an H55? All the super cool trucks run them.
Fixed it for you Jason
- Thread starter
- #734
Thanks for the kind words. I've got a couple more projects going that I'm really looking forward to the end results.
- Thread starter
- #736
Thanks Tim
(Nelson voice on) HA HA (Nelson voice off)
Thanks Tim
I know your skin is thicker than that.
great work. Love the progress.
- Thread starter
- #739
Been thinking about that for some new seats. Won't happen for a bit.
Going to be a busy weekend. Everythings looking good so far though.
I'm working Saterday but let me know if you need a hand Sunday evening
