This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

UNRELATED: How does that split unit A/C perform for you in these temperatures?
Well it’s only covering the 450square foot office. It’s actually worked quite well for the few times in a used it. Of course the office has spray foam walls and ceiling.
 
Thank you for the response. I am converting my old 2 1/2 car attached garage, also going to be spray foamed, to a “TV type” great room it’s around 625sqft. While I ‘think’ the central a/c will deal with it, I am seriously thinking to add a split to the room as well. I hear they are super quiet and actually work well.. I’ve also read some stories 🥵 but in the minority.
 
Thank you for the response. I am converting my old 2 1/2 car attached garage, also going to be spray foamed, to a “TV type” great room it’s around 625sqft. While I ‘think’ the central a/c will deal with it, I am seriously thinking to add a split to the room as well. I hear they are super quiet and actually work well.. I’ve also read some stories 🥵 but in the minority.
It’s very quiet, works like a charm. The office also has 12’ ceiling. I’ve got zero complaints so far.
 
My brothers Pig , 100* outside today full tank ,came out to this

55 gas problem.jpg
 
Been working in shop all day organizing things, lots of pig parts along with 40 parts I need to get finished.

Trying to wrap my head around some things Delancy had. No shortage of drum brake parts, dizzy with Jim Cs label on box but not thinking it has been rebuilt but will open it tomorrow. Plenty of new hinges including hood hinges.

Some gasket I have no idea what it went to, assuming one of the lights. Doesn’t look like it would fit but will see.

Tomorrow I organize the 79 parts.

IMG_2022.jpeg


IMG_2023.jpeg


IMG_2024.jpeg


IMG_2025.jpeg
 
Found nice tailgate switch for the glass labeled 72 with matching keys. Only problem, no keys and no 72!!!
 
Learned yesterday there has been some progress on the 69 body which will go on Delancy’s flying pig chassis.

Headliner, all windows with new rubber. Interior carpet (we had custom made for front and rear) and padding installed. All of it matches the seats we had same shop reupholster. Should be the bees knees!!

She is back across the parking lot at paint/body shop where it has live for last 2.5 years. It’s already primed with all the rust repaired, so bring on the paint!

Fingers crossed I’ll be making road trip with trailer in a few weeks.
 
Last edited:
Learned yesterday there has been some progress on the 69 body which will go on Delancy’s flying pig chassis.

Headliner, all windows with new rubber. Interior carpet (we had custom made for front and rear) and padding installed. All of it matches the seats we had same shop reupholster. Should be the bees knees!!

She is back across the parking lot at paint/body shop where it has live for last 2.5 years. It’s already primed with all the rust repaired, so bring on the paint!

Fingers crossed I’ll be making road trip with trailer in a few weeks.
That is some great news! Did you have an upholstery shop make custom front carpet?
I am looking for some ideas for a new front floor mat.
 
Last edited:
That is some great news! Did you have an upholstery shop Make custom front carpet?
I am looking for some ideas for a new front floor mat.
Enjoyed breakfast my friend! Just getting home and yep, custom for the front.
 
Last edited:
I have seen so beautiful front floor coverings for the 40 and 45’s that pop up in auctions and I initially believed they would come from Toyota and likely from other countries. I never even considered the possibility they are custom made. Frankly, I like that ..ALOT!
 
Hell it’s been so long hope I’m not lying here. That was our intent. I just want to get my pig back, we had carpet section made for the rear, middle and front by upholstery shop. I hope that’s what I get when I pick it up.
 
That’s a deep rabbit hole…
I can only imagine….the holes I have fallen into in the last 3 years are deep enough….appreciate the information
 

Users who are viewing this thread

Back
Top Bottom