Here is the goose coop and run that I built. Coop is 42”x48” and the run is 6’x8’. That’s 19g 1/2” hardware cloth on sides, top and bottom. I used full 2x4s on the bottom frame but everything else is 2x4s ripped in half.
The chicken coop and...
Have to share the final product, wife asking for me to do same so she can get chickens. Ducks, they are frree roaming laying eggs everywhere and all the local critters eating well.
Yep. It's the nozzle size and not the cabinet size that makes a difference. You can get varying sizes of nozzles, but even the small ones take a fair amount of CFM. And the small nozzles end up being like trying to paint an entire car with an...
I continue to battle the weather and my schedule with traveling plans the wife has made. All this has made getting access to shop difficult. Along with that we have had some hard downpours over the last month pushing a ton of loose sand to the...
Amen!
Have to admit I get little misty eyed, every time the “Star Spangled Banner” plays. Usually I fly my Alma mater flag under her but today all about old glory!
To those who are serving, have served and especially those who died protecting...
The important requirement for blast cabinets is CFM. Meet the demand for CFM on the cabinet you purchase and keep the air reasonably dry, you will have blasting bliss ☺️
Michael
Thanks, I have no idea what requirements are for the blast cabinets (obvious huh) but have some comfort knowing this particular compressor. would work. So many options out there and I don't see a need for a super pricy one, especially...
When people ask how long have you been into Cruisers I always say my whole life. Since my Dad's recent passing we have been digging through old photos. These were taken sometime in the Fall/ Winter of 1973-1974. Yours truly in the Red Overalls...
@greenbeast as hard as I tried, I now have Christmas decorations up in The trusses. Laid a few plywood panels…at least I don’t have to look at this stuff occupying my space. I use the lift as an elevator to access that area
@WarDamnEagle that...
Good to know, If I get a blast cabinet in the future it will be a smaller one. Unloaded trailer today since wifes company needs the trailer back so several containers of cruiser goods got dumped in the shop. I was clear from the beginning with...
I've got a 25-year-old Quincy 80 gallon, 5hp, two-stage compressor. Like knuckle, I chose the output (17.1 cfm @ 175psi) for abrasive blasting with a Skat cabinet. Even at that output, the compressor cycles pretty frequently while blasting.
Happy to..But remember…you asked and I have nothing to do right now
my compressor is a 5HP 2-stage compressor with a 120 storage tank. It’s a vertical upright and has a magnetic starter at 220V. Made by Campbell-Hausfeld.
Here’s the better...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.