But likely good enough.Good from far... far from good.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
But likely good enough.Good from far... far from good.
40/55 vs 60 series Toyota bushings are all different sizes I think, I know the OD on the 60 series bushings I got won’t fit the stock hangers in rear. Check on 60 series sizes?Howdy!
Here’s a comparison pic between an LC aftermarket poly replacement on the left, and Ruff Stuff’s bushing stock on the right.
Ruff Stuff sells their bushed DOM sleeves with an ID bolt sleeve for either a 1/2” or 9/16” bolt. Without the inner sleeve the bushing’s ID is 3/4”. The greasable shackle bolts which came with the new shackles I picked up from CCOT are 18mm. It’s a loose fit. Been scouring the web for something to possibly use as a sleeve to tighten the fit a little bit. What I don’t really know is if 18mm ID, 20mm OD, DOM tubing would be too much of an interference fit for an 18mm bolt. I’m going out on a limb and guessing, yes, it would be. So the next possibility would be 19mm ID, 22mm OD DOM. A nice fit bolt to sleeve, and a possible need for boring the bushings a bit to get the sleeve in.
Another option is to refit for 3/4” bolts. Possibly find a machinist to drill a set out, bore out the bolt holes in the shackle and everything else.
ATM, planning on doing absolutely nothing.
View attachment 2249281
Found this finally. Was gonna drop the name-bomb even before finding this, and sure enough, the guy delivered already!
Thanks @cruiseroutfit !
75 series spring swap on my 55
AJ, your bushings will be here in the morning :cool: Just for clarity, the bushings you are using for the front leafs are the same dimensions as the OME SB1 parts (actual bushing part number is PT260 however yours are not the OME units per your desire) I'm excited to see this thing all wrapped...forum.ih8mud.com