Builds Cruisermatt's FJ62 Build-up (1 Viewer)

[hj 60]

I did all the lines myself and in steps so to many times redoing the brake pressure, the small lines are really cheap online so next time I wold buy them pre-build, with all the bending and trying to fit and forgetting the bolt before pressing the flange

But I am happy to see you are fixing it because over here rubber lines with a little crack or rust must be replaced at the road-check and I thought it is skipped in the usa road check because nobody mentions the brake-lines.

 

[cruisermatt]

1987 Transfer case came in the mail from @tputterman, thanks again!

Time to get it cleaned and pepped to build onto the NP203 that should be here before the end of the year or early Janurary from @Lil'John.

 

[cruisermatt]

And some parts came in, 4Runner wiper arms, washer pump, cap, and a new some light lens

 

[cruisermatt]

And I may be making a purchase soon that will warrant its own thread... It's a surprise

 

[SNLC]

Curious, why did you go with the 4Runner parts?

Cheers

 

[theron]

Curious, why did you go with the 4Runner parts?

Cheers

I was about to ask why he went with the 2006-2009 4runner wiper arms vs. the 1996-2001 ones? Are they different?

I put the '96 version on my truck recently, post #318 at the bottom.

 

[SNLC]

I am curious because the Cruiser parts are still available. So is it an upgrade?

Cheers

 

[theron]

I am curious because the Cruiser parts are still available. So is it an upgrade?

Cheers

4runner arms are cheaper, by like....~$20/each...and they seem to have a larger spring. I get a better wipe with the 4runner arms.

 

[cruisermatt]

I ordered for a 1995 or 1996.. Don't remember exactly but it was definitely in that time bracket.

 

[theron]

I ordered for a 1995 or 1996.. Don't remember exactly but it was definitely in that time bracket.

You sure? The Part # on your baggies, 85221-35100 comes up as 2003-2009 4runner...but maybe the part is actually the same?

 

[cruisermatt]

I don't know, haven't taken them out of the bags yet. We'll see I guess!

 

[cruisermatt]

Aw hell I just checked the invoice, I ordered them from a 2007. Don't know what I was thinking. These things are sweet though, about to check to see if they fit or if I'll be returning them

 

[cruisermatt]

Nope! Not even close. Listed in the Classifieds.

Just went to install my new washer pump and cap, the cap doesn't stay on the jar because it's too cracked, and the old pump works when bench tested

Ordered 1997 wiper arms, caps, and a new washer Jar. Might as well have a completely new washer jar

Can anyone think of why the pump wouldn't squirt fluid? The button on the wiper control stalk activates the wipers. Weird.

 

[bluehawk]

man, every time I check into your build there are a ton of new parts going in. Looking good.

 

[cruisermatt]

I just can't seem to do anything once

Big surprise tomorrow night. Any guess besides @GLTHFJ60 (who I already told)?

 

[klinetime574]

I just can't seem to do anything once

Big surprise tomorrow night. Any guess besides @GLTHFJ60 (who I already told)?

Only thing I'd guess is another motor, or another cruiser.

 

[thewall151]

Matt,

I would like to order the 1997 wiper arms and caps for my 60. What are the part numbers you used and website to order from please. I replaced the internal linkage but my wiper blades always skip when it rains everyday.

 

[cruisermatt]

I like Toyotapartsdeal.com (formerly Toyota parts zone) or @beno.

Just order them for a 1997 4Runner, I don't know the part number off the top of my head.

 

[cruisermatt]

Only thing I'd guess is another motor, or another cruiser.

 

[klinetime574]

I'm either real smart or you're predictable lol.

Can't wait to see what you've got up your sleeve.