What have you done to your Land Cruiser this week? (35 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

bikersmurf said:
Great solution. I went a much more complicated route and turned a pair of shouldered bushings out of Delron to solve the same problem on my very worn doors.
Click to expand...
I was surprised that there wasn't a bushing used for this application. It appears the door metal itself acts as the bushing with just a plastic washer to help the lever use/twist/rotate against the painted door. I was going to go the shouldered bushing route, but the hole isn't worn too much.

How each problem gets resolved is like the quote, 'Necessity is the Mother of Invention."
 
GA Architect said:
I was surprised that there wasn't a bushing used for this application. It appears the door metal itself acts as the bushing with just a plastic washer to help the lever use/twist/rotate against the painted door. I was going to go the shouldered bushing route, but the hole isn't worn too much.

How each problem gets resolved is like the quote, 'Necessity is the Mother of Invention."
Click to expand...
Opening line to the Buffett song “math sucks”
 
Moved Green Bean to her new home at the Texas coast. Tight fit!

10.28.2021.Fish Camp.2.jpg
 
Hey all,
New Guy, first post. This week I managed to get my FJ43 from the port of Baltimore and have it shipped to my home in Northeast Ohio. The shipper arrived to the port of Baltimore and the truck would not start or roll. He never managed to get it started, but he was nice enough to use a winch to pull it into his enclosed trailer and bring to the house. Once he arrived, we used my 4Runner to pull it out of the trailer and pull/push it into the garage.
Once in the garage, I did a quick walk around and found the things that has been messed up during shipping. I removed the customs labels and residue with goo gone and took off the old badging.
Then the bigger issues started to get addressed. I am working through the ignition and brake issues now. It looks like I am getting intermittent spark to the plugs, but it appears to be really weak. I have adjusted the front left brake drum so that the wheel will now roll. The right rear drum is still locked no matter how much the star wheel is adjusted.
I ordered new badges from Specter Off Road. I am looking for a good vendor for seat belts that fit. It currently has aftermarket shoulder belts.
Thanks to all who have poster here over the years, I have been a long time stalker, now I finally have something to post.
ADFB251F-2EC9-497F-8927-5C8AE3AC45F1.jpeg
 
jeffallen1 said:
Hey all,
New Guy, first post. This week I managed to get my FJ43 from the port of Baltimore and have it shipped to my home in Northeast Ohio. The shipper arrived to the port of Baltimore and the truck would not start or roll. He never managed to get it started, but he was nice enough to use a winch to pull it into his enclosed trailer and bring to the house. Once he arrived, we used my 4Runner to pull it out of the trailer and pull/push it into the garage.
Once in the garage, I did a quick walk around and found the things that has been messed up during shipping. I removed the customs labels and residue with goo gone and took off the old badging.
Then the bigger issues started to get addressed. I am working through the ignition and brake issues now. It looks like I am getting intermittent spark to the plugs, but it appears to be really weak. I have adjusted the front left brake drum so that the wheel will now roll. The right rear drum is still locked no matter how much the star wheel is adjusted.
I ordered new badges from Specter Off Road. I am looking for a good vendor for seat belts that fit. It currently has aftermarket shoulder belts.
Thanks to all who have poster here over the years, I have been a long time stalker, now I finally have something to post.
View attachment 2824290
Click to expand...
Nice looking Land Cruiser! And welcome to MUD.
 
jeffallen1 said:
Hey all,
New Guy, first post. This week I managed to get my FJ43 from the port of Baltimore and have it shipped to my home in Northeast Ohio. The shipper arrived to the port of Baltimore and the truck would not start or roll. He never managed to get it started, but he was nice enough to use a winch to pull it into his enclosed trailer and bring to the house. Once he arrived, we used my 4Runner to pull it out of the trailer and pull/push it into the garage.
Once in the garage, I did a quick walk around and found the things that has been messed up during shipping. I removed the customs labels and residue with goo gone and took off the old badging.
Then the bigger issues started to get addressed. I am working through the ignition and brake issues now. It looks like I am getting intermittent spark to the plugs, but it appears to be really weak. I have adjusted the front left brake drum so that the wheel will now roll. The right rear drum is still locked no matter how much the star wheel is adjusted.
I ordered new badges from Specter Off Road. I am looking for a good vendor for seat belts that fit. It currently has aftermarket shoulder belts.
Thanks to all who have poster here over the years, I have been a long time stalker, now I finally have something to post.
View attachment 2824290
Click to expand...
Welcome to Mud! Nice ride
 
In the grand scheme of things nothing special but I did drop in a new cargo mat. 😊
8EF62611-606B-406B-BF42-772AA6F0A2E8.jpeg
 
You must log in or register to reply here.

Similar threads

Mike Shull
Where Have you Driven Your 40-Series This Week?
13 14 15
Replies
296
Views
29K
igotta40
igotta40
T
What is this?
Replies
11
Views
490
jim land
jim land
C
  • Question Question
What tools do you keep in your FJ40?
2 3
Replies
42
Views
4K
65swb45
65swb45
wchevron
What size lift do I have.
Replies
10
Views
644
JackA
JackA

Users who are viewing this thread

  • ... and 3 more.
    • Total: 36 (members: 11, guests: 25)

    Share this page

    Back
    Top Bottom