- Joined
- Jan 11, 2014
- Threads
- 26
- Messages
- 579
- Location
- North Georgia
- Website
- marcstpierrephotography.com
I REALLY like that color !! ... I like it flat too. Just like you have it !!
2.5" lift ??
What have you done to your Land Cruiser this week? (91 Viewers)
- Thread starter IH8MUD
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
2.5" lift ??
S4Cruiser
SILVER Star
I could go for a butterfinger blizzard! Good thing there isn't one within 20 minutes of my house.
Got a new one
No barn dooors yet. Still need to finish. Just a quick drive around the block slowly.
Fabricated a bracket for the twin stick going on the Orion TC attached to a 6L80. What fun. Started looking at the rest of the linkage, I may need to make a couple of tweaks there too, it figures. Also modified the booster spacer bracket so it will sit flush on the firewall by adding a tab to it. Also made a rubber gasket to fit in the recess between the firewall and spacer as well.
S4Cruiser
SILVER Star
Put her on the lifts just to check things out.
These are after about 100 miles.
Everything still leak free.
Was worried about the inner axle seals, but those Merlin Crawlers did the trick. My memory is not so good, that's why those white arrows are on the backing plates. Still need to put a longer hose on that breather.
Looks like its going to be ok.
These are after about 100 miles.
Everything still leak free.
Was worried about the inner axle seals, but those Merlin Crawlers did the trick. My memory is not so good, that's why those white arrows are on the backing plates. Still need to put a longer hose on that breather.
Looks like its going to be ok.
Fixed a seam leak and sending unit on this original 50 year old tank.
So clean
Too clean!
I'll bring you my rig so you can get your hands dirty
Gave the old 3B a cold start after sitting inside my unheated garage for 6 weeks. -10c was the inside garage temp today haha.
*I should add i pushed it back so it was closer to the garage door to help with exhaust before starting. One guy tried to call me out on having driven it back before the video haha.
*I should add i pushed it back so it was closer to the garage door to help with exhaust before starting. One guy tried to call me out on having driven it back before the video haha.
Last edited:
That's pretty bottom!
Careful.... THAT might just pass as sexual harassment!
In the 45 section ..... GoatBuild thread for this definitely!
Build thread for this definitely!
Yea, start the thread when you start the build. Don't wait and do it when its almost done like someone we know.
Ran in to a problem getting a gasket for the windshield wiper motor cover, on our 2/75 40. Seems no one has the 85292-90300 which I believe to be the right one, so I figured what the hell order the other one (85292-90301). Well its too long. Hope this is not NLA. here's pic of the wrong one. Must be for later build date.
