What did you do with your 60 this weekend? (5 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

No way dude! I took that picture. That was my friend's before he sold it. He said he sold it to someone with a 60, that must be you then!
Yeah, man. Asa messaged me a few months ago wanting to know if I'd sell it back to him, haha.
 
Something small and something big!

IMG_2767.JPG


IMG_2766.JPG


IMG_2768.JPG
 
Just ordered a rebuilt carb to install next weekend along with my white knuckle rock sliders. Big Turkey Weekend!
 
Fan has been running rough lately so I cleaned out the squirrel cage. Lots of black gunk in the motor housing. Once cleaned runs much better .

IMG_3728.JPG


Installed new OEM lift gate struts. McGeorge has them for ca. $33 plus change. Old ones were beginning to loose their oomph in the cold weather and I'd rather not be hit on the head with a falling lift gate.

IMG_3723.JPG
IMG_3725.JPG
IMG_3726.JPG
 
No sport. All utility

312E52BF-BFF2-434E-9A91-103E8CF037A5.jpeg


(4) 2x6x16
(2) 2x6x10
(9) 2x6x12
Almost 400 lbs on the old Thule clone roof rack. If I had a newer rack with more cross bars I could probably safely carry more but then the handling gets wonky
 
Last edited:
What was the total damage on that set up (if you don’t mind)?
@MACFJ60
$465.00 w/ shipping
New retractable seatbelts front/ rear with center lap belt.
Front belts part #503165
Rear retractors part #30014365
Not sure on center as I didn’t receive it.
Found last night I received 2 front sets and 2 rear retractable seat belts with no center lap and no dust covers for rear. 6 retractors total... Not sure what happened to my order. Sent an email to Steve at Seatbelt Planet. My invoice just has the total cost and not itemized line items.

@Hojack what color is that?
Grey 65
 
Last edited:
I did this today. And the #5 plug, and the oil cooler coolant hose.

8F3F3B22-BD84-4784-A28B-8EE04AB76B60.jpeg
 
Installed Ironman springs. Measurements from center of axle to fender before were 20" front and 19" rear. After springs it's 21" LF, 20.5" RF, 23" both sides rear. So I got 4" of lift in the rear and only 1/2 - 1" in the front which is probably what I'd get just putting in fresh stock springs. Vendor is checking with Ironman. And btw that is without any bumper on the front and I'll be adding an ARB and possibly a winch.
IMG_20191123_123136.jpg
 
Replaced Master Cylinder....

it's fun rolling to an intersection and the light is red....and you try to slow down......and squish..no brakes
WoooT

:cool::beer::banana:
 
Last edited:

Users who are viewing this thread

Back
Top Bottom