Using Rustoleum Appliance Epoxy. I've used it on a lot of projects and I've not had any real issues. I guess we will see how it goes. Thanks for the heads-up, Joe.
TWT -- The Wrenching Thread (2 Viewers)
- Thread starter jfz80
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
SFROMAN
SILVER Star
Joe,
I also have to order or find some used screws that hold the frame up.Those are bent pretty bad. It was a pain in the butt to unscrew them. Luckily they weren’t stripped and I was able to unscrew them with a few love taps with a hammer on the big plastic handles on the inside.
While I’m at it I am going to take the dash out and replace it with the dash from the white one which is in way better shape.
New radiator in the old Tercel in preps for the Relic Run. Gotta have the ol girl I tip top shape if she’s gonna make it up Daniel ya know 
I think the old one has seen better days. Looking at it out I can’t believe it was still cooling. Incredibly easy swap, probably took less than 20 minutes. Why can’t all things be that easy to work on?
I think the old one has seen better days. Looking at it out I can’t believe it was still cooling. Incredibly easy swap, probably took less than 20 minutes. Why can’t all things be that easy to work on?
Last edited:
40LandCruising
Anderson
Swapped out the OME J springs for Slee 4” mediums and rebuilt the tire carrier on the 40 with bronze bushings.
ROBsSON
Yeah thats my dad
NCFJ
Supporting Vendor
S4Cruiser
SILVER Star
Smart choice. It’s rained enough here that it won’t be dusty until tomorrow afternoon.
Ok now that all my must-do items for CRR are done, I’ve moved on to the nice the haves.
The last must-do item was to install a working alternator to give the sixty juice and to ensure my horn passes inspection. Nice working unit given to me via @Ian Crawford . No pic needed. Nice to not have to roll around with an extra battery in the backseat.
Brining my kid to CRR and since she doesn’t have the luxury of a steering wheel to grab with whit knuckles or an oh sheet handle, I figured at least I can put an armrest on the tuffy... went to jo-Anne’s got some high density foam and vinyl and then too a trip to the seemstress for some sewing. End result is two inches of goodness (insert favorite joke here). Should make the ride more comfy
Finally a todo on my bucket list was to remove the Mickey Mouse ears from my roof rack since I don’t like the glare off the hood anyway. I personally like the look without the Kc hi-lighters, kinda cleans up the look.
After shot- don’t mind the assault bike in the way
Before
The last must-do item was to install a working alternator to give the sixty juice and to ensure my horn passes inspection. Nice working unit given to me via @Ian Crawford . No pic needed. Nice to not have to roll around with an extra battery in the backseat.
Brining my kid to CRR and since she doesn’t have the luxury of a steering wheel to grab with whit knuckles or an oh sheet handle, I figured at least I can put an armrest on the tuffy... went to jo-Anne’s got some high density foam and vinyl and then too a trip to the seemstress for some sewing. End result is two inches of goodness (insert favorite joke here). Should make the ride more comfy
Finally a todo on my bucket list was to remove the Mickey Mouse ears from my roof rack since I don’t like the glare off the hood anyway. I personally like the look without the Kc hi-lighters, kinda cleans up the look.
After shot- don’t mind the assault bike in the way
Before
Picked my 80 up from the shop that did my head swap. Engine bay is going to need a good detailing. All the dust was wire wheeling a lot of clay off the exhaust manifolds. After my 30 mile drive home, highest temp i saw was 192, and most importantly, radiator and overflow were both full, and no dreaded green splatter stripes down the passenger side, and no puddle of green underneath. Thanks to @fj40z for the ride in the awd tercel rally car up to the shop. Engine purrs like a kitten now.
Full on manic mode now.... off to the alignment shop (I replaced my tie rods , and then to get my new rubber mounted up.
Full on manic mode now.... off to the alignment shop (I replaced my tie rods , and then to get my new rubber mounted up.
I finally got around to some new shoes on the sequoia. I found some decent meat attached to these 4 runner rims for 500$. Cost me another 165$ for lignite. But looks good and rides an inch higher
CRR prep proved successful, now time to do 4x the work in two weeks. Funny how timing works out, lol.
fourtrax
SILVER Star
Two weeks is plenty of time
ROBsSON
Yeah thats my dad
Not a crazy difference but added a cheap leveling kit till I get the bilstien or OME kit for the Tacoma. Happy with it soon I’ll add some cheapo street tires to get me through the summer
@WhiteTiger911 @stevezero might have some tires for you.
