rear body mounts (3 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Do you guys caulk these seams in the doors?

image.webp


image.webp
 
Probably not absolutely necessary,
But if you seal the outside with a good seam sealer then coat the inside with an undercoating or good rust preventer made for interior panels you'll never get the rust line that will form along that edge.
 
But if you seal the outside with a good seam sealer then coat the inside with an undercoating or good rust preventer made for interior panels you'll never get the rust line that will form along that edge.
Agree 100%.
Being from AZ, you almost never see rust in that area. I forget about the rest of the country. The worst I’ve seen is usually along the bottom edge.
 

Users who are viewing this thread

Back
Top Bottom