bobm
WTF, WTF, WTF!!!!
Milk crates with Sissy bars 
Rear Seat Retrofit? What are my Options?
- Thread starter zu13
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #22
Those, add a headrest kits, sounds like the best idea for the upholstery and will maintain the best look! Now the big follow question would be to mount the belts to the future cage or to the body. Body sounds best in my opinion and less "Jeep" like! haha
Is there a goto junk yard/pull apart model truck to pull from that's similar length and just drops in? How are you guys reinforcing or mounting these belts to the vehicles that didn't come with the shoulder belt? I would prefer new belts with pretensioners for my children.
Thanks,
Is there a goto junk yard/pull apart model truck to pull from that's similar length and just drops in? How are you guys reinforcing or mounting these belts to the vehicles that didn't come with the shoulder belt? I would prefer new belts with pretensioners for my children.
Thanks,
Seatbelt geometry is a real thing and I wouldn’t blindly give advice about how best to protect your children.
Most aftermarket seat belts come with some generic instructions and mounting hardware.
Most aftermarket racing seatbelts will also give you some general guidelines on mounting locations.
If I was going to go through the steps you are talking about I would look at the requirements for some the racing sanctioning bodies like S.C.O.R.E. or S.F.I and follow along with their recommendations, they have some proven requirement and will take all the guess work out of it. It won’t cost much if any more to have belts installed to a standard.
Lots of info out there, this will give you an idea...
Seat Belt Brackets & Mounting Hardware Kits | SeatbeltPlanet
Upgrade your seat belts with one of our hardware kits and mounting brackets from SeatbeltPlanet! These kits come with everything you need to install belts.
www.seatbeltplanet.com
Last edited:
bobm
WTF, WTF, WTF!!!!
Bungee cords 
My mom used to just stick her arm out to keep us in place when she needed to do a quick stop 
Mine was a smoker so she had to do something with the lit cigarette before she could save me from smashing my head on the steel dash, but yeah I grew up with that exact in-car safety system..My mom used to just stick her arm out to keep us in place when she needed to do a quick stop
bobm
WTF, WTF, WTF!!!!
That explains a lot bobm
WTF, WTF, WTF!!!!
My father did the same. My Father, Mother and 8 kids in the old Ford wagons. He could reach across to passenger door and to back of middle seat . If you was misbehaving he would say get up here so I can Smack 
️ you did'nt say No. When he spit out the window always gave a warning . Always had a between his legs.
. If you was misbehaving he would say get up here so I can Smack ️ you did'nt say No. When he spit out the window always gave a warning . Always had a between his legs.
bobm
WTF, WTF, WTF!!!!
Ya he smoked too!! L&M's. Come to think of it he was pretty talented, drinking a beeMy father did the same. My Father, Mother and 8 kids in the old Ford wagons. He could reach across to passenger door and to back of middle seat
, smoking a 
, driving the car and smacking ️a couple of us at the same time.
Were we in the same family? My dad was the same. But there was a hole in the front floor board where the empties went.Ya he smoked too!! L&M's. Come to think of it he was pretty talented, drinking a bee
bobm
WTF, WTF, WTF!!!!
Must be . He just threw the Miller talls in back with us kids and said send another 1 up from the cooler
. He just threw the Miller talls in back with us kids and said send another 1 up from the cooler These were the days when men were men and children knew their role, and the world was balanced.
bobm
WTF, WTF, WTF!!!!
Nailed it
