FJ40 Non USA Air Cleaner Assembly Support Bracket No. 2 Tech (2 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Ackcruisers

SILVER Star
Joined
Nov 24, 2019
Threads
143
Messages
1,288
Location
MA
For those looking to simplify or streamline their engine bay by installing a Non USA Air Cleaner Assembly from an 8/80 + FJ40 17700-61081 (8/80 - 10/82 Paper Element).

IMG_2159.jpeg


There are two brackets:

The primary support 17851-61020
The lower support No. 2 17852-61020

IMG_1001.jpeg



The lower bracket attaches to the bottom of the air cleaner assembly and to the engine block. Only engine blocks after 8/80 (11411-61013) will have the necessary mounting bolt holes as shown.

IMG_2156.jpeg


image.jpeg


image.jpeg
 
That other bracket 17852-61010 shows applicability for 7/79 -7/80 for air cleaner assembly 17700-61080.

1/75 - 4/78 does not show a bracket for air cleaner assembly 17700-61010…

IMG_0999.jpeg
 
When you find the bracket, please post it... Curious to see where it mounts.

Now I have to buy a new 2F motor to mount my bracket to. 😂
 
There were a few changes to the round air cleaners over the years. Bracket 17852-61010 (7/79-7/80) was used for extra air cleaner support and attaches to a bracketed stud on the rear side of some of the the air cleaner cans, and then to two tapped holes on the outside of the intake manifold. Of course the air cleaner that originally came with the engine may have been substituted over the years.
 

Users who are viewing this thread

Back
Top Bottom