Cruisers and Company 80 Series Turbo (30 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

It’s an 8HP isn't it? Want to test it on my 1HD? LOL.
Not an 8HP.

BUT The trans has a much deeper first gear, slightly taller overdrive, is 11% more efficient, stronger for more stage 2 madness, will keep the driveshafts the same and be very PNP with a very versatile controller that will hook to the factory 93/4 ecu’s, the 95-97 ecu and will connect to our emu black via CAN.

Also will only require a new bellhousing to work…

Oh and you can buy remanned units from Toyota.



Surely someone can guess lol bellhousing has already been made.
 
1000 blessings. and 8 gears 🙏

I feel a proper modern trans would be a game changer in these rigs, even with a stock motor. more power to the ground, super tall 1st gear, pretty much eliminating the need to re-gear the diffs. halfway pays for itself in re-gear savings.
@baldilocks 😜
 
Some people are never satisfied.
You wheel yours... 34% deeper first gear. Should make for a substantial improvement.

Combined with 3:1's in the tcase it will be 83% lower than stock....


I love this thread. 💘
Lets make it better... Want to be the first to standalone and Intercool your SC? Intercooler would require some development but the ECU is nearly PNP (new IAT and knock sensors)
 
Last edited:
You wheel yours... 34% deeper first gear. Should make for a substantial improvement.

Combined with 3:1's in the tcase it will be 83% lower than stock....



Lets make it better... Want to be the first to standalone and Intercool your SC? Intercooler would require some development but the ECU is nearly PNP (new IAT and knock sensors)
I’ll be waiting for you guys at the next bend or river crossing on the trail. 😎
 
Not an 8HP.

BUT The trans has a much deeper first gear, slightly taller overdrive, is 11% more efficient, stronger for more stage 2 madness, will keep the driveshafts the same and be very PNP with a very versatile controller that will hook to the factory 93/4 ecu’s, the 95-97 ecu and will connect to our emu black via CAN.

Also will only require a new bellhousing to work…

Oh and you can buy remanned units from Toyota.



Surely someone can guess lol bellhousing has already been made.
CAN I ENJOY SOME HOURS ON THE SEAT FRST!!!!
damn it Johnny-C&C is going to end my marriage in 2026.
 

Users who are viewing this thread

Back
Top Bottom