What have you done to your Land Cruiser this week? (18 Viewers)

[65swb45]

Pulled both outer door handles off the ‘64 and welded on them until they matched the holes in the doors/locks. No more rattles.
Then I did the same to the ‘64 gas pedal. Got an extra 1/2” of pedal travel now!

 

[mattressking]

I was out there about 2 weeks ago. There is another 40 identical to mine about 3 miles out of town. He was out the same night I was, but didn't get a chance to talk shop with him.

Does it have black rear flares? If so that might be the one I've seen - I've seen two in the plains, can't remember if both had rear flares or just one. The only other red 40 I've seen was out in Clifton for a motorcycle meet a number of years ago.

 

[CondeCruiser]

Does it have black rear flares? If so that might be the one I've seen - I've seen two in the plains, can't remember if both had rear flares or just one. The only other red 40 I've seen was out in Clifton for a motorcycle meet a number of years ago.

It does have flares.

 

[Mike Shull]

I finished the other fender this weekend.

 

[FJmaine]

Got the top on. Need to clean it up and get the rear doors mounted. Its been a long time since I've had a moving 40. That top has probably been sitting under a tree for 10+ years.

Started fixing/ rebuilding my ambulance door.

Ran out of Argon/CO2 mix. Can't get more until Monday.

 

[Mike Shull]

Got the top on. Need to clean it up and get the rear doors mounted. Its been a long time since I've had a moving 40. That top has probably been sitting under a tree for 10+ years.
View attachment 3129040
Started fixing/ rebuilding my ambulance door.
View attachment 3129041
View attachment 3129042
View attachment 3129043
Ran out of Argon/CO2 mix. Can't get more until Monday.

Looks great!

 

[70fj40]

 

[70fj40]

Took it for a spin, was all good fun until I started to put it back in the shop and noticed my drivers side hub was considerably warmer than the others.

 

[Ackcruisers]

Blasted then filled pitted skid plate #51495-60011 by using All Metal. Now have to reroute exhaust so this will fit.

 

[Grayscale]

Nothing like removing loose material from the exposed frame rail, inner fender well, steering stuff, and hitting it with all-position gloss black in a can. Not even masking, just chasing with acetone the over-spray, and don't care about drips, or windy day.

Not quite a "rattle-can-resto," but, just keeping up with stuff. Getting rid of rust stains, and gas stain, on paint, adding structure, covering holes with 22g unpainted patch panels. Not hiding anything, but, it makes everything look good when it gets an even layer of dust from the trail.

 

[Comet]

Patches like this? Project WTF keeps moving slowly onward .

 

[airon23]

I finally got around to changing the diff fluids and installing the new drain/fill plugs.

Also I've been working on getting the FJ40 a little bit nicer space to rest. I think it's turning out pretty good.

Lastly, I finally got around to hanging up the wall art I've been working on.

 

[65swb45]

I finally got around to changing the diff fluids and installing the new drain/fill plugs.
View attachment 3129339
View attachment 3129341

Also I've been working on getting the FJ40 a little bit nicer space to rest. I think it's turning out pretty good.
View attachment 3129344
View attachment 3129343

Lastly, I finally got around to hanging up the wall art I've been working on.
View attachment 3129342

Camera angle makes it look like your main steering rod is bent.

 

[airon23]

Camera angle makes it look like your main steering rod is bent.

Yeah I was thinking the same thing as I was posting that picture. I'll have to check it out for sure.

You got anymore of those lying around?

 

[65swb45]

Yeah I was thinking the same thing as I was posting that picture. I'll have to check it out for sure.

You got anymore of those lying around?

Sure do. I stock both bare rods and complete assemblies with genuine Toyota TR ends.

 

[Grayscale]

Can probably complete two or more of them if it is limited to mechanical refresh, upholstery, and repairing aged structure.

 

[Pitter Patter]

Rainy day here in VA. Got the top on and the PSA in place.

View attachment 3128764

View attachment 3128765

Uhhh, so I’m doing a frame off in a 1 car shed. Mind if I use your lift?

 

[projectTuRD]

Cleaned up the front end that’s been sitting in my yard for a couple years now, and yanked the current one out of the truck.

 

[Greek Cruiserhead]

@FJmaine
Looks good, way to go!

Your doors look brand new, do they are the new "made in China" doors?

 

[FJmaine]

View attachment 3129502

@FJmaine
Looks good, way to go!

Your doors look brand new, do they are the new "made in China" doors?

They are not new. If you got close, you would see some rust holes and pitting on the bottoms, but in pretty god shape for New England. I threw a quick coat of rattle can flat black on to make them look a little better- lipstick on a pig. This is what they looked like last week. I'm trying to get everything back together and looking decent for an event in Vermont this upcoming weekend.