FJmaine

When the question is "Is it fixable?", the answer is always YES! I'm not a welder, but I get there eventually

Not mine, but saw this in a store in Nashville last weekend.

Do you have a map of the class 6 roads in NH? I love the class IV in VT, but don't know where the NH roads are.

Here are a few more photos of places I DID NOT drive to this week but I found some negatives and used a small Kodak scanner to “digitize” them and they are Land Cruiser pics! Route 58 towards Hazens Notch..closed in winter February 1974...

Here’s some old photos from 1974 in Montgomery Center, VT. I sure would love to know what ever happened to this 40. I sold it in 1980. This was Cota’s garage and Lutz was a great mechanic.. by the late 1980’s it became Lutz’s Garage. Since...

I transfer the mud from VT to ME, then pressure wash it in my yard. Its usually fairly loose mud and doesn't stick to the tires and throw it out of balance.

They provide maps of the class 4 roads with color coding to identify the difficulty. You can take preplanned routes with guides or choose your own adventure. Green= Easy Blue= Bumpy- recommended 4wd and clearance Red= Difficult- 4wd, clearance...

Vermont Pilgrimage 2026. Three days of wheeling on the Vermont Class IV roads. Only had to winch through one area and came through the entire trip with no damage! My drivers window crank broke and I need to replace my rag joint. Other than that...

I didn't look that close. I checked the A-pillar vin plate for the year, then had to get up on the mountain to meet some people.

There's a handful around the Portland area that I know of. I drive mine all the time and get excited when I see another!

Not mine, but saw this beauty at Sugarloaf Mountain on Saturday. When I first saw it, it was all alone in the lot. When I came back, it had a friend parked next to it. Wish I had brought mine!

I'm not going to the fall gathering this year. Maybe next?

This is happening next week in VT. https://the-pilgrimage.com/ I know of at least 2 40 series that will be there.

Is anyone running a Viair onboard system? Looking to see how other folks have theirs set up. Thining about putting the compressor under the driver seat. Where have other people put the tank?

I am getting ready to install a VIAIR Constant Duty OBA Onboard Air System with 450C Air Compressor & 2.5 Gallon Tank. Has anyone else used this setup ? Looking to see where other folks have mounted the compressor and tank. I'm thinking about...

Did it work?

Moved my Pack-out crate storage from passenger side top driver side to combat the dreaded FJ tilt.

I'd be happy to participate, but October is approaching the end of my driving season. Once salt is on the road, I park it for the winter. I'll be at the Pilgrimage in South Royalton, VT again- 1st weekend of October.

I have these two threads book marked for when I finally get around to rebuilding my power steering box: https://forum.ih8mud.com/threads/mini-truck-power-steering-rebuild-kit-help.1111014/...

Added pinstripes, finished the roof, added door seals to the ambulance doors......and drove it!

Check him out on Instagram https://www.instagram.com/weshouldbeadventurers/?e=1b0d93f2-b71d-4ca9-a76a-e05636058676&g=5