Given how they weld the tabs on I wouldn't see why not.
What have you done to your Land Cruiser this week? (24 Viewers)
- Thread starter IH8MUD
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Given how they weld the tabs on I wouldn't see why not.
Made a bracket for the proportioning valve and got the rear lines tackled. Next to finish up the front hardlines.
thecrazygreek
A.K.A. TheCraftyGreek
started putting some jewelry on the 73. Getting closer... 
thecrazygreek
A.K.A. TheCraftyGreek
Did I put the side hooks on wrong?
Last edited:
The rubber stopper looks backwards.
The tape measure alignments I've done have been better than the ones I've paid $277 for. The shop who put in a bushing that wasn't enough wants to charge me another $277 to put in a 3.5 degree one... which they think will be enough.
fyton2v
SILVER Star
Finally refinished the front bumper. I liked the patina, but with the rest of truck painted I figured the bumper should be too. One day, I'll get to the inside grey parts and maybe the wheels.
Well I have been procrastinating on putting my hardtop together. Fishing has been too good... but the summer weather up here has come to an early end. I wet sanded/ buffed the panels, and installed the OEM 1978 window weatherstripping. Top is going on today!!
Went for an Ice Cream. . . I mean Frozen Yogurt. I chose the transportation, wife chose the destination.
Finished up my 8-month long disc brake conversion and axle rebuilds! Now to get my rear drive shaft lengthened so I can take it on a real drive.
The boys approved of the work.
The boys approved of the work.
Last edited:
DSB345
SILVER Star
Saw a little problem at my lower steering column when I was replacing my rag joint. So I took the steering column apart.
Now I need to find some parts.
Now I need to find some parts.
More progress..
thecrazygreek
A.K.A. TheCraftyGreek
Started mounting some goodies on the rear...
bwalker16527
1974 FJ40 SBC V8 350 TH400
Got cap and doors primed and ready to paint. Also fixed rust on hardtop sides.
Is that Nebula green?
thecrazygreek
A.K.A. TheCraftyGreek
Fashion green.... was going for 6h9 grayish olive but the paint guy screwed up.. lol...
S4Cruiser
SILVER Star
More fun stuff...not the wiring part though... I worked almost constantly for 3 days but feel like I'm moving at a snails pace.
OBA setup is close to being done. Made a couple brackets one for the coalescing filter and one for a 2.5 gallon tank. I was able to tuck the tank up super high. The rear of a 40 was made for this Viair tank.
I ran the tank feed air line inside the frame and plan to sleeve it with some berry compliant nylon webbing to protect it from abrasion.
Need to pick up a couple right angle fittings and figure out where to mount the secondary filter/regulator then add quick connects 1 - rear and 1 - front.
OBA setup is close to being done. Made a couple brackets one for the coalescing filter and one for a 2.5 gallon tank. I was able to tuck the tank up super high. The rear of a 40 was made for this Viair tank.
I ran the tank feed air line inside the frame and plan to sleeve it with some berry compliant nylon webbing to protect it from abrasion.
Need to pick up a couple right angle fittings and figure out where to mount the secondary filter/regulator then add quick connects 1 - rear and 1 - front.
