Anyone know the part # for the saginaw pump for a bill dorry bracket for my ps conversion . Thanks scott
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Here is what I have figured out after doing much research on this site.
The power steering pump is part number 206823. This is the pump for a 1977 Buick Century, and other cars from that time.
The pulley you can get from GRAINGER Pulley: PN 3x586, Bushing: PN 3x573.
Hope this help you.
That is the keyless tapered shaft. Anyone know the part number on the one with a key?These are the same numbers I have written down. They come from Romers build thread here... https://forum.ih8mud.com/40-55-series-tech/65318-my-min-truck-power-sterring-install.html
Also, fyi... you can still get that pump from rockauto.com for $52.79.
Good Luck.
Copenhagen1
That is the keyless tapered shaft. Anyone know the part number on the one with a key?
Sweet. Thanks.Cardone 20-6000 will get you a keyed shaft with a threaded end.
The saginaw pump that I used is 206801. You can use the 206823 or others such as the 206800.
I like the 206801 because of the direction the return is facing. I use the wide Martin sprocket. Check with Iron Pig as they sell a wide sprocket (sheave/bushing) there.
I use Rock Auto for the saginaw pump.
Sweet. Thanks.
Does that one have the keyed shaft also? The reason I ask is I have a pulley from MAF and do not need another. My pump casing (the reservoir) is bent and so it will not seal properly around the pump.
Does that one have the keyed shaft also? The reason I ask is I have a pulley from MAF and do not need another. My pump casing (the reservoir) is bent and so it will not seal properly around the pump.
Good tip. If I could get a reservoir for a few bucks I would be in good shape.Contact
AGR Performance, Inc.4920 Rondo, Ft. Worth, TX 76106
Phone: 817.626.9006
Tell them you want a keyed shaft and whether or not you want a flair seal or O-ring seal. They can make any combination at a very reasonable price for a high performance pump. I've run their super pump for over 7 years and it just keeps on ticking. Ask them about reservoirs, I did and got one with the style of low pressure return I wanted. Again, it was very reasonable cost wise and when I received it, it was chromed.