I picked up a set of WRX Blue 380cc injectors (Subaru Part Number 16611AA521) to replace the stock 310cc injectors (Denso Part Number 23250-74080) in my 97LX hoping that by increasing the fuel I would be able to increase boost and make more of what we are all after, POWER.
After very minimal research I decided to start replacing the injectors only to find that the WRX injectors are about 1/4" shorter than the original Denso injectors. Fortunately that seems to be the only issue as the plugs are identical as well as the OD on the inlet and outlet sides.
My next step will be to machine down the plastic spacers (after accurately measuring the difference in height) to accommodate the new higher flow injectors.
My question is has anyone done this swap? So far through search I have only found people talking but not doing this swap.
After very minimal research I decided to start replacing the injectors only to find that the WRX injectors are about 1/4" shorter than the original Denso injectors. Fortunately that seems to be the only issue as the plugs are identical as well as the OD on the inlet and outlet sides.
My next step will be to machine down the plastic spacers (after accurately measuring the difference in height) to accommodate the new higher flow injectors.
My question is has anyone done this swap? So far through search I have only found people talking but not doing this swap.