- Joined
- Sep 28, 2002
- Threads
- 558
- Messages
- 8,122
- Location
- Kamloops, BC Canada
- Website
- www.shopraddcruisers.ca
Great build, just came across it.
Noticed you did not capture alot of the axle with that beefy track bar mount, we have seen a few peeled away from those thin tubes....
Noticed you did not capture alot of the axle with that beefy track bar mount, we have seen a few peeled away from those thin tubes....
Been working on a trac bar. I decided to go with 1.5x1.5 square tube .25 wall.
![]()
I used Dan's axle mount. It worked pretty well. I had to open up the tube radius a bit. I'm going to add a gusset across the back of the bracket on the housing.
![]()
At the frame end, I did 2 RE joints with a 4" shackle.
![]()
![]()
The top tube is 48" long eye to eye so it should work pretty well.
![]()
Kind of caught the sun with this one.
![]()