Hello All,
I am in the early stages of planning a 2FE for my 60. I have been reading and reading all the threads on this and my head is hurting. So with that I need to start my own thread and ask my dumb questions specific to me so I can move forward. This is what I have so far.
To start I have an 87 FJ60 built 12/86. My engine is not original to the truck. It was purchased by the PO in 2000/2001 from SOR. It has about 30k on it now. Serial number on the engine is 2F 527112. Trying to figure out what year it is from.
So my starting point is a complete 2F. It is my daily driver so I want to get all the parts together that I need and then build it out. I don’t really want to get a whole 3FE engine as I just don’t have that space and don’t want to deal with the extra parts after. With that in mind I am making a list of the 3FE components that I need to track down and get:
3FE Parts (Parts in red I already have)
- Fuel Rail
- Injectors
- Intake Manifold
- Wiring Harness
- ECU
- Fuel Lines
- 62 tank with Fuel Pump Assembly
- 62 tank straps
- Distributor
- Head
- Air Filter Assembly
- Exhaust Manifolds
- Thermostat Housing
Sensors
- Water Temperature Sensor: 182-65 (On Thermostat Housing)
- Water Temperature Switch: 182-67 (On Thermostat Housing)
- Cold Start Timer Switch: 182-66 (On Thermostat Housing)
- Throttle Position Sensor: 037-140A (In the throttle body)
- Air Flow Meter: 012-36A (On the Air Filter)
- Vacuum switching valve: 048-71A (For fuel pressure regulator)
- Ox sensors: 048-10L (x2)
Other Items
- Water Pump Reducer
Recommended Items
- Camshaft (2F): Visit to Delta
- Rockers (2F): Visit to Delta
- Conrods (2F): Balanced
- Pistons (2F): Flat top
So, what am I missing??? I know I am. I’m just not sure of what.
My end goal when all is said and done is a 2FE + H55F + Stock transfer case. And I do want an AC system.
Any help would be appreciated.
Thanks
I am in the early stages of planning a 2FE for my 60. I have been reading and reading all the threads on this and my head is hurting. So with that I need to start my own thread and ask my dumb questions specific to me so I can move forward. This is what I have so far.
To start I have an 87 FJ60 built 12/86. My engine is not original to the truck. It was purchased by the PO in 2000/2001 from SOR. It has about 30k on it now. Serial number on the engine is 2F 527112. Trying to figure out what year it is from.
So my starting point is a complete 2F. It is my daily driver so I want to get all the parts together that I need and then build it out. I don’t really want to get a whole 3FE engine as I just don’t have that space and don’t want to deal with the extra parts after. With that in mind I am making a list of the 3FE components that I need to track down and get:
3FE Parts (Parts in red I already have)
- Fuel Rail
- Injectors
- Intake Manifold
- Wiring Harness
- ECU
- Fuel Lines
- 62 tank with Fuel Pump Assembly
- 62 tank straps
- Distributor
- Head
- Air Filter Assembly
- Exhaust Manifolds
- Thermostat Housing
Sensors
- Water Temperature Sensor: 182-65 (On Thermostat Housing)
- Water Temperature Switch: 182-67 (On Thermostat Housing)
- Cold Start Timer Switch: 182-66 (On Thermostat Housing)
- Throttle Position Sensor: 037-140A (In the throttle body)
- Air Flow Meter: 012-36A (On the Air Filter)
- Vacuum switching valve: 048-71A (For fuel pressure regulator)
- Ox sensors: 048-10L (x2)
Other Items
- Water Pump Reducer
Recommended Items
- Camshaft (2F): Visit to Delta
- Rockers (2F): Visit to Delta
- Conrods (2F): Balanced
- Pistons (2F): Flat top
So, what am I missing??? I know I am. I’m just not sure of what.
My end goal when all is said and done is a 2FE + H55F + Stock transfer case. And I do want an AC system.
Any help would be appreciated.
Thanks
Last edited: