Hate to sell but need something more practical. I have a 1972 fj40 with a rebuilt 6 cylinder that has about 7 thousand miles, runs like a top. It has a 5 inch lift with 33 but also have the original leaf springs to take lift off. Have the original wheels with tires and another set of 30 to go along with it. It is all original hardtop has a aussie locker in the rear and has been in for about a year. the interior is all redone with brand new upholstery on the front bench and the two rear jump seats. Looking for a newer one like a 100 series so maybe a trade. Asking 7500 . It is located in Eugene OR till middle of August
adam
FJ40 | BJ40
Classifieds: Toyota 40-series Land Cruiser
Filter by prefix:
.
Filters
1967 Toyota FJ40 Landcruiser
I am listing this for my dad as he is more computer illiterate than i am :D
He is selling his 1967 Toyota FJ40. It sports a good running Chevy 350 engine. He just recently installed a rebuilt 700R4 in place of the GM Turbo 400 for the overdrive. He will also incude the turbo 400 with it. Transfer case was just recently rebuilt so the trans and TC are like new. Seat was recovered last year and is in great shape.
Keep in mind this vehicle still needs some work such as a paint job, tires are somewhat worn but serviceable. The front drive shaft needs to be extended after the 700R4 conversion. He has tried to restore most of the vehicle as he could. Good soild running, streeet worthy vehicle that would...
White 1972 40 for sale in Southern California (inland Empire)
Hate to sell, but must be done.
1972 body with little to no rust
1978 rebuilt engine (2f) with approximately 12,000 miles on it (if PO was up and up about mileage, no reason to think otherwise)
Spring over Axle
Saginaw Power Steering
35's
Warn 8274 Winch
78 Seats
Sm420
4 speed
STC Fastrak Softop (8 months old)
Hardtop (a little rust, but not bad -pics available)
Sides and back available as well (need some work)
Weber Headers
Weber 38/38
flowmaster
4 point harnesses (front only)
Roll Bar
That is just the highlights. This rig is not locked up, but read on to solve that problem.
I have driven this rig for the last year as a sometime commuter vehicle and a...
I am looking for a 1975 Fj that I sold to a guy in Columbia Missouri around 1994. I needed money at the time and had to sell it. If you own this cruiser let me know. The last time I saw it, it was painted dark green with a double roll bar. I know it is a long shot but I thought I would give it a try.
Thanks,
Eben Hall
Thought I would offer it up here before it goes to e-bay this weekend. Completely rebuilt 40 from the ground up. All new EVERYTHING, except for the cherry 1972 california frame, and 78' body. New GM crate 350, New NV4500, New Atlas II 4.3, and the list goes on to the tune of over $50K. I am asking $29000. OBO. If you are serious about buying a top dollar rig, then here it is. I cannot type everything that it has, or I'd be here all night. I'm dreading having to put it on the auction site for the same reason.
I can be reached at (559)994-5331 for a list of everything she has on her. The re-build has taken 3 years, and it all has 3500 miles or less on it. I will try and post a pic or two here, but not sure if I'm allowed. I am located...
A job loss forces me to sell my little rust free gem. I'd like to sell it locally...
1965 (no emissions :cool: ) FJ40 V8 W/ 3 Speed
Less than 100 miles on new 31" tires.
Brand new never installed Bestop supertop w/ 2 pc. doors
All of the rails have been installed. Everything else is still in the box in my living room. I will not sell the top separately.
New Brake Master.
Fully wired Power Mercedes 90 seats
Newly upholstered rear bench seats with marine grade vinyl.
I discovered a leak on the electric fuel pump today... so I will be replacing that or considering that when I sell it otherwise she is a STRONG runner.
I have $4500 into my little money pit w/receipts.
Asking $3800 but will entertain reasonable...
So I had an “accident” on Ebay. I bought another toy that I have been looking g for 7-8 years. I’m still married but I have to get rid of one of my rigs. So here goes. I have a ’76 FJ40. But you can see from the picture it is set up as a long distance woods truck; not a technical crawler. I had two rigs; the 40 and a ’63 FJ45; one lived on the beach and one was a logging truck. They both had frame issues so I put them together with the help of certified welders and the picture shows the results. The frame is 8 years old and still straight and level to 1/8” on the longest diagonals and would accept any 45 body bits including a box. It has dual cylinders for the rear wheels so they can be used like tractor brakes. This combined with the...
Must be a well maintained rig with no major issues. I realize the most 25+ year old trucks need something
but not looking for a project
Must be mostly stock (NO v8's)
Prefer post '76, but will consider others.
A cruiser currently located in the midwest would be ideal
You Can email direct to jefsyl@wyoming.com
Hey to all, I'm getting out of the old toy business :crybaby: ...Gotta 73 fj40 daily driver...with hard top on it(rust in normal places)....soft top is in the shed(usable but needs replacement). :D Everything or nothing deal...$2500.
It has a RR fender fold(lost a tire) that needs to be fixed but other than that she is for the trail or fixer up. Has good rubber all around 33X12.5X15. Parts in the garage include a clucth plate W/bareings...Carb.. valve cover... oil pan and other things. It has to go so give me a call or e-mail me at: b_a_mech@yahoo.com Cell: 850-217-1123
Thanks for lookin :cheers: Ron in Florida
Somebody might want this info from Craigslist...
Reply to: see below
Date: 2005-06-13, 10:53AM PDT
Land Cruiser, 1982 (final year of the "jeep" model). Body very good, runs great. All original, top never removed. 163,000 miles. $5000 or best offer.
Leave message at 510-841-6940
Aaron
Need to sell my project '40.
Arizona truck with fresh 350 V8, SM465, 3 speed transfer.
80% complete on total restoration. Body is Freeborn Red. Fenders and Hood need painted and wiring installed. Dismantled down to the frame, stripped, epoxy primered with PPG acrylic enamel finish coat.
SAAB leather power seats, New tires.
Grey Bestop soft-top in new condition.
Good Hardtop not yet restored.
Over $12500 invested...
First $7000 takes it, or best offer.
Not a basket case, just needs finished.
Email me at bpwhite@netins.net for pics and more details.
Located in East-Central Iowa
saw in local news paper
2 1971 fj 40 both complete & some rust on one $5,000 for both
at frazier park ,ca.93225 PH 661-245-3137
TLCA#7721
93 fz 80
87 fj 60
75 fj 40
:cheers: :beer: :popcorn:
This truck is a good starting platform for anyone wanting to build a real solid rig. The Production date is Oct 77 so Ibelieve that makes it a 1978. The 40 is complete minus the engine, trans, and transfercase. Everything has been removed from the 40 for painting painting. I have all door hardware including glass and door panels. hardtop is solid. The rain gutter and fiberglass top are perfect. The passenger side panel could use some work or even just replacement. The drivers side ambi door is perfect. The passenger side needs the lower inch replaced. Both front doors are in great shape considering their age. The windshield frame is also in good shape. The drivers side front fender is new from Toyota. The passenger side...
This 40 Series is owned by a friend of mine. Non-original yellow paint is so-so. Interior is clean. Dash is original. Nice soft top, no hard top. Good tires and wheels, 4 drum brakes, Chevy 350 with headers, original 3 speed tranny, nice aftermarket stereo and speakers. I believe this truck may have only the original 37k miles from looking under the rig. It is really clean with no rust. I didn't spend a lot of time looking at the body, but I didn't see any rust. I doubt this truck has ever been out of California. I don't think that this would be a candidate for those of you who are looking for a purist ride, but with a nice pulling 350 and pretty clean interior, and an original 3 speed, it would make a nice trail ride and get around...
What is a 65 fj40 with surface rust, runs, new tires and brakes and rebuilt carb. It has about 90k on the vehicle. It had lived in Wyoming for its long life. Sorry no pic,s yet. I have been talking to the owner every spring for some time. I offered $700 last spring he was thinking $1500.
hoping to find my old FJ40. I sold my mint 12k miles Red 1981 FJ40 in 1991 with factory AC and power steering. The only mods - BFG 31x10.50 on white wagon wheels, Warn Winch and Rancho Shocks. This was an all original garage kept cruiser that was never off road (too clean) I sold it to Cool Cruisers Of Texas who I think sold it to someone in Oklahoma. I will dig around and try to find the VIN to help with the search. Thanks for any leads :confused:
Looking for a stocker (or slightly modded) 76-84 FJ40 in GA or surrounding area.
Concerned mostly with a straight, solid body and generally good stock mechanicals.
Email bquintrell@paceacademy.org with pics, desc. and asking price.
Thanks!
Time to simplify my life a bit...
78 FJ40, stock, smurf blue.
Rear sill and doors have less than the usual rust. Tub was undercoated from new and is solid. Frame and axles still have the factory paint. Never modified in any way. Worst part is some shoddy accident repair early in its life. For some reason it has drum brakes in front... Was like that wh en I got it. A little body work and paint makes this is a nice stock 40. One of the best running 2F's I have driven.
Will have a brand new clutch, rear main seal, and any other clutch job related parts over the next week.
Bought it to restore and have massive project overload... Something has to go.
Also have a split hood, 2 sets of ambulance doors (one set is rust free)...
sorry, now I have 2 threads going.
can't seem to find where to delete this one.
look here:
https://forum.ih8mud.com/showthread.php?p=505039#post505039
I have a 1970 FJ-40 for sale, with a 69 FJ-40 for parts $1500 for both. I am located in central NC
Going to let the project go , I have way too much going on right now. Its a 68 fj40 with a 78 2f motor with the matching 4 speed tranny. Its lifted and has 33 inch tires on 15 inch rims , its been sitting for a long time and the tires have dry rotted somewhat (its a shame because the tires have 99 percent of the tread on them). The tub had some rust but the previous owner had plates welded in and they did a decent job. There is no rust at all on the windshield frame , rear doors etc. This will make a great project , I have already bought new : Brake master cyl , clutch master, clutch slave cyl , 4 core radiator , poly gas tank . It runs and drives , shifts through the gears and 4 wheel drive works. Looking to get $2500. Email me , pm...
I've finally gotten my cruiser finished and ready to play with and we've got a baby on the way. So, while the baby is good, the truck is bad (at least in my wife's eyes). I've listed it for sale on www.cruizers.com so check it out if you're interested. It's definitely a rockcrawler more than a show truck. It's a 1969 with ARB air lockers front and rear, SM 420 transmission, power steering and hard top. The rest is listed on the for sale page, but feel free to ask any questions at srestum@yahoo.com. The truck is in Bozeman, MT.
PICS MAKE OFFERS
FIRM-It has a brand new clutch and the interior is great. Email me or call me 610-378-1874
Thanks
Lowered to $4000.00
Come and get it!!!
As much as I hate to have to do this I am forced to sell my FJ40 :frown: . The rig has not been modified from stock but will be sold with an 86 Ford 5.0, and NP435 Tranny, and various little parts. The truck runs and drives but has not been further than around the block in the last couple of years.
There is rust in the rear corners but the floor is in good shape. All the glass is intact and the factory seat has been recovered.
The rig is located in Northern California.
Asking $2700.00 or best offer
Thread Filter
Latest posts
-
-
-
-
-
Gas tank building excessive pressure & fuel smell. Dangerous for sure! Why does this happen? (14 Viewers)- Latest: Dparo
-
-
-
-
Trying to buy 2017 LX570 - Struts and Rack and Pinon Concerns? - Advice Requested (16 Viewers)- Latest: Sandroad
-
-
-
-
-
-
