FJ40 | BJ40

Classifieds: Toyota 40-series Land Cruiser

Filter by prefix:

New to wheelin'. looking for a clean fj40 pre 1975. Clean and stock is best. recently stationed in anchorage hoping to find something in the area, if not I have folks in ohio, and arizona. Have a budget of about 7000, but that includes shipping, and any repairs to make it emissions/street legal in ak. Any help would be greatly appreciated.
I have a 1974 FJ40 that is not stock and built for trails that I would trade for a wagon (FJ60, FJ62, FJ80). I have read that the 1974 FJ40 has desireable features for trails but I haven't used it this way (I heard transfecase gearing and 4 spd transmission are desireable) Reason why I am trading: We are a growing family and I cannot get close to fitting everyone in the FJ40. I also have a stocker 1980 FJ40 that can serve us well around town. I need a wagon that we can use more easily. 1974 FJ40 with original F engine (rebuilt), original 4 speed. Last 500 miles have seen the following: Rebuilt Aisin carb, Front disk brake swap from 1978 FJ55 (has vented rotors), all new exhaust from engine to muffler. Complete front axle...
Hi!! I need to sell my rig as much as I hate to do it, I really came to the realization that I just cant work our play with it any more. Do to medical problems I cant use my rig any longer. This is what I have done so far. A built Tuned port injection 350. Built th400. Cut Dana 44 6" wider than stock LC axles. Cut Dana 60 6" wider than stock LC axles, the rear has an arb locker and the front is limited slip both are 4:88 gears. Both the front and rear end have all new parts in them. There is a spring over with reverse shackle done on the rig with stock springs the rear springs are a little wore out. Saginaw power steering with high steer and reinforced front boxed frame. 35x12.50x15 BFG 85% tread left mounted on micky...
78 Fj40 project vehicle WI
78 Fj40 project vehicle WI **sold** vehicle has been sold. thanks to all who inquired Brian 78 FJ40 located 30mi west of Milwaukee zip 53118 vehicle has sat for a few years, started recently but ran rough normal rust for FJ40's, rear quarters, sills, under doors front frame rail bent due to crash, limited to section in front of radiator 2F motor interior in good shape and complete (rear jump seats and roll bar are there) underbody oem fuel tank 950 obo, must sell by end of month (moving out of shop space)
I know there have been a lot of newbies with the same question. I am sort of a newbie, but have been visiting this site almost every day for the past 8 months. I have been looking for a clean FJ40 the past year. I wanted something in pretty good condition and think I've found it. The only draw back is the wheel wheels were cut and fender flares added. MY question is am I paying to much? I am paying $8,800(less than they were asking). The cruiser is early 1977 - so no pop out windows(July 1977). THere is hardly any rust - mainly on door edges and screws , but mainly surface rust. The rear sill is pretty damn good, with justy a few small bubbles. The rear quarter panels are excellent except above the rear lights there is a...
1970 Fj40 For Sale. Complete original vehicle. Ran well until parked, low mileage. Cruiser has been 80% dismantled. Heavy rust in the rear of vehicle. Asking $3,400.00 obo. Located just outside of Atlanta, GA. Will part out. Pictures coming soon! Contact at jdavis779@yahoo.com
Specs on the truck: Drivetrain: Desmogged 2F- with approximately 70k miles- runs great HEI Distributor Header, 2.5" custom exhaust SM465 Transmission (rebuilt) New clutch, pressure plate, T/O brg, pilot brg, resurfaced flywheel 3spd Transfer Case (rebuilt) ARB lockers front and rear with new bearings (4.11 gears) Warn Birfield Eliminator front axle 33x12.50 BFGoodrich MTs w/ 90% tread Other: 2.5" lift springs Full "family" style rollcage Power Steering Good hardtop Full-length bikini top Custom rock sliders Frame-up restoration 5 years ago Drop-down aluminum rear tailgate with internal storage compartment Grey Bedliner on the interior of the tub Pictures available at...
1971 FJ-40 Body- has significant rust in the both rockers and the driver side pan is pretty much gone. Rear corners also have significant rust and there is a piece of diamondtred steel that has been welded over the originial cargo floor in the rear. I have already knocked out the rusted metal and bondo put in by the PO. Its ready for sand balsting. This stuff will be easily fixable in you or someone you know has an sheetmetal fab/welding skills. I have new body panels that I have made to replace the rusted areas. All other body parts (hood, bib, fenders, etc) are in good condition. I also have the original doors that have a little rust at the window sill. These would make great hard half doors (why I kept them) Motor-The engine was...
I have a 1978 FJ40 for sale. Don't know too much about it, it was my fathers but he passed away and I cant drive it so Im forced to put this rig up for sale. What I do know original mustard yellow paint with only paint scratches dents and such as expected on an older car,all work except motor work done by TLC of van nuys california, chevy 350 small block, edelbrock intake, holley carb, pro comp suspension, nice interior new front seats back jumper seats are perfect, wired with speakers all around, new starter, new air filter, new volt regulator, like new 33inch tires. Located in southern california asking around 15,000. email for pics and if you want to come look at it yourself. Smithers8806@aol.com.
Parting out FJ40/NV4500 kit/ARB's/OME/V8/PS/Aluminum tub selling whole $5500 or less as parts sell from it contact me at 604-944-0382 if you need parts from it one used 1980 FJ40 Red powder coated body parts with red spray can over top first GEN. aluminum tub, fenders, and tailgate mint front doors no roof great condition 1976 harness 35" tires on 15x8" chrome rims Saginaw power steering solid frame good hood bib(from 1978) WSF are in great shape no motor OME suspension kit in nice shape 4 spd LC tranny and t-case Advance adapter kit was used for the V8 swap healthy 350 with aluminum intake, HEI distr. more Cruiser parts available parts $5 and up NV4500 kit for 16 spline t-case (never used) large knuckle disk...
WANTED: fj40 project in or near ky,in,tn,wv WANTED; fj40 project in or near ky,in,tn,vw. the main thing i'm looking for is a workable body for an fj80 axle swap trail rig setup. so basily axles dont mater if that makes sence. good frame with workable front sheet metel would also be nice. v8 swap a plus. i'm in louisville ky. whos got what and were? sandmannb@bellsouth.net
I have no affiliation with this guy just saw a 40 for $300 with no bids. If I lived anywhere neer TN I would have bid and kept my mouth shut but since it is too far for me I though someone closer like to get it for a fixer or parts. Sorry forgot the link http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=8007610812 E
Looking for 79+ FJ40. Looking for an all original rig. Will spend 10-15,000 for a nice one. Please email pics to msterrett@wavecable.com if your selling a rig that I might be intrested in. Thanks
'69 fj40 for sale ZERO rust! New Paint(freeborn red), Body is in perfect condition! All stock suspension and drivetrain(2f 3spd) runs and drives All rust has been removed and replaced w/ steel panels, All body work and paint professionaly done by Rocky Mountain cruisers. Hard top.aftermarket aluminum tailgait w/ locking storage. Rhino lined tub interior. Must sell $4300 303-717-3940 (Aaron) located in Parker Colorado (near denver)

Thread Filter

Latest posts

Back
Top Bottom