FJ40 | BJ40

Classifieds: Toyota 40-series Land Cruiser

Filter by prefix:

I'm looking for a running 65, 66, or 67 fj40 for sale. Must be running and able to drive reliably to me. I'm in Vegas and looking for a project vehicle that falls before our emissions standards so I can evaluate different drivetrain/power combinations without having to re-smog annually. I would like a hardtop, doors, and clean title. Some rust is not an issue. If you have a project laying around, that you might think I'd be interested in, please pm me. If you can make it run with some small effort I'm definitely interested. Rust is ok, ugly is ok, just has to make it home with no major leaks, blowouts, lock-ups, or failures. I'll fly out and drive it home. If you've seen one on a lot, or down the street, send me a number. I'd...
looking to trade bj40 for hj47????
Love my BJ40, but looking for more room for the kids and dogs! Wife just sold our MDX. Not looking for a project though. I finally have mine where I want it. Runs great, drives true, starts every time. I use it as a daily driver. It's no fun sitting in the garage. Its a great looking and running cruiser. It's got the typical rust spots in the rear quarters and front door bottoms. Ambi doors are great. Looking for the same in HJ45 or HJ47. Feel free to email me @ eric@urbanenewhaven.com as I don't spend as much time on mud as I'd like. I know this is my first post. I'm more of a reader than writer.
Need to sell 74 FJ-40 in Reno Nv. Nice rock crawler All this for $8000.00 Can e-mail more pics Do I need to add OBO to get some feed back? $12,000 in parts alone what do you guys want? Would post more pics but can't figure it out, sorry. Check it out. Here's a recap of all the extras. Steering over springs from All Pro Offroad, Toyota truck front disk breaks and hubs, custom front drive shaft from Tom Woods, 3sp transfer case with sm-420 transmission, spring over shackle reverse, 22 gal fuel storagetank, rear bench seat with storage, full roll bar, cb radio, 10 disc cd changer, lockright lockers front and rear. reworked transfer case shifter for more options, Confer roof rack, Hard top, steel doors, soft top and...
For sale 1976 fj40 lc
:)76 fj40 for sale, chevy 350, edelbrock off-road carb, factory 4 spd & t/c, metal tech front cage kit, 4:10 or 4:11 gears (i cant remember.) detroit lockers f/r, 33x12.5 pro-comp m/t on black steel wheels with spare. Tread is 100% on spare & 85-90% on other four, has bikini top and full steel doors, has some very minor rust in a couple spots and some minor trail damage on the passanger side. Is a perfect canidate for restoration, and is an excellent trail rig!! Garage kept in winter and driven weekly in summer. All tags and inspections are current. Cruiser is located in rhome, texas. Im asking $5000 o.b.o. I would love to keep it, but have bills to pay!!!
Not sure where to put this and have no affiliation to the gent. I bought a hardtop and ambulance doors off his dad and found out his son was selling his needing money for school. Didn't see where I could put this thread. Move if need be... What it has: 1971 FJ40 from New Mexico now in Abilene TX I put a chevy 350 in because it had a blown chevy in-line 6 I have a bikini top. 5 brand new BFGoodrich AT tires. It works, but the throw-out bearing needs replacing. New upholstery, paint, carpet, and bumper. 3 speed. He said $5000 but you never know. wadespaulding@gmail.com link to pics Picasa Web Albums - Mollie - Land Cruiser
Smogged 1977 FJ 40 in Central California
This rig is a 1977 California Emmissions Standard Rig that passes the California Emmission with no problems. This rig could be a daily driver. It has clean paperwork, I have Title in hand. It is currently Non-Opped. I coud wash it and wax it and take blury photos, but I don't do that. You see it the way it is. The Freeborn Red paint is faded. It has been waxed through byt the PO. Located near Visalia, California (South of Fresno) $3,900 on Craigslist $3,600 for Mud Members with a Silver Star and a TLCA Member Has the standard rear sill rust. What has been done very recently. Front Axle rebuild using the Marlin bearing kit and Marlin HD seals. New Exhaust with Cat. All correct emmision equipment has...
I've got this on Ebay but thought I would list it here also. Motor, transmission and transfer case DO NOT go with it. I recently purchased this for some select parts I needed and I don't have the room in my shop for the rest. It is a 1978 FJ40 with a build date of June 1978. The PO had blasted the frame and tub and had the frame painted. This frame is VERY nice. The tub is pretty good also with a few repaired areas and a new rear sill installed. After the repairs some type of bedliner was sprayed in the tub and the underside and cowl was painted. If I were able to keep it I would spray another coat of liner on the underside and inside the tub. There is some filler in a couple of spots like the right rear outside of the tub...
Someone buy my Cruiser!  '65 FJ40
I'm in a cash crunch. I'm thinking $6K on Ih8mud. If that's too much, let me know. PRICE DROP $4500.00 She's been around a bit. Lot's of mod's, but has sat for about 3 years in the shop & just driving around the yard. From the engine back: SB chevy w/Jacobs(love it), cast shorty headers, mean green starter, JET q-jet carb, Engine driven air compressor, SM420 tranny, 3 speed 'case w/ saver attached, welded rear on coils, disc braked all around, super bifs up front w/ inners, Aisin hubs with large (3/8?) stud upgrade, ezlocker in front, front on coils, aluminum radiator w/ Black Magic fan. The tub is on new(ish) mounts, the cage is attached to the frame, the front fenders are tubing, the seats are cheapie Summit plastic with...
79 FJ40 landcruiser , custom restoration, in WA
1979 Toyota Landcruiser FJ40 Your dream cruiser is ready. Are you? ➢ Less than 5K miles since complete frame off, ground up restoration of a super clean rig. ➢ Body was full disassembled, plastic media blasted, rotisserie prepared, very little rust was found and fixed. Body prepared with epoxy metal etching primer, acrylic urethane base coat, clear coat. Every inch of underside coated with heavy grade hand applied undercoating. Inside of tub shot with Line-X urethane bed liner. ➢ Reassembled with all new stainless fasteners and seals ➢ Chassis: fully disassembled and sandblasted, epoxy primered and heavy enamel frame paint. ➢ Front axle: FJ 40 with Warn birfield eliminator kit, High alloy axle shafts, Warn Premium hubs, 4:88 Yukon...
1977 FJ40 for sale, 1 extra set of tires included. extra parts also included. 86*** miles, but was left outside in the snow for to long. Needs work but for an FJ40 lover its nothing. Asking Price is $1500 o.b.o. Located in Savannah, GA I will coaporate with helping to ship at buyers expense and schedualing the transport CO. Title in hand tags up to date. http://www.cardomain.com/ride/3177290 sorry for the qualety of the pics, and pics where taken in MN explains the snow. Call (912) 228-1252 or email me johnh7@gmail.com John Huber
1977 FJ40 in Oregon
1977 FJ40 in Oregon -- SOLD -- 1977 Toyota Landcruiser FJ40[/url] Pictures at Picasa Web Albums - Cory - 77 - FJ40 (the bezel is no longer upside down :cool:) It's a 1977 FJ40. Had a pretty good body-on resto about 2 years ago. Price: $11,000 or possible trade w/ cash for a 2004-newer Chevy/GMC Crewcab duramax. Engine/Drive Train: The truck has a Pro-built small block 400 that dyno'd with 400 lb of torque, hooker headers and 40 series flowmasters. Saginaw power steering conversion and shackle reversal up front. Brakes are all good: discs up front and drum's in the rear. Rest of the drive train is stock 4 speed and stock transfer case. The drive train does leak a little oil. Have a rebuild kit for the front axle, just...
G'day all, I'm not sure if I am meant to do this, but I don't see why not. I have listed my 1980 BJ40 on Ebay, and I would love to see it go to a good home in the Up Above. It is far too nice a rig to stay in Australia, and it needs a loving home. I will help ship it from here if anyone wins it in the US/Canada. There are loads of pictures/info on it on Ebay. Thanks, and let me know if this is verboten, and I will delete this thread. 1980 Toyota LandCruiser BJ40 - eBay Post-1970, Collector Cars, Cars, Cars, Bikes, Boats. (end time 15-Oct-08 18:20:44 AEST) Cheers, Josh This truck is sold, and is going to a new home in the US. One more Cruiser in the Up Above!
1969 FJ-40 Land Cruiser, Georgia
1969 Toyota FJ-40 Land Cruiser Engine: Stock In-line six the 145 I think, lot's of torque, good oil pressure and no overheating, very clean under the hood. Trans/Transfer: 2 speed transfer case with the vacuum lock to engage front not sure of a model number. Transmission is a 3 speed on the column, shifts smooth, no grinding, nice full pedal clutch. Paint: Good condition, it is not the original paint, it is a dark red, the interior is a bedliner type of coating, probably LINE-X. This is also on the rails and under body. Body: No rust, there has been a little repair on the rear fender area of the tub but nothing major and it looks good.Can't really tell there has been a repair there. Axles: It has the original axles which...
Restored/Improved 1977 FJ40 $18,500  - THIS WEEK $15K!
Restored/Improved 1977 FJ40 - SOLD. Reluctant though I am to do it, my 40 needs to go. New baby and slow economy means that toys sacrifice for the greater good. details are: 1977 numbers matching Fj40. Non-catalyst so no emissions testing. Toyota Yellow (mustard) Current VA inspection good until 8/2009 Runs great, no problem with traffic or highway. Cruises easily at 75 (or more if you want.) Power Steering (FJ60) 4 spd 2F 2.5" OME Dakar lift 33"x9.5" BFG AT's (5) great tread on factory rims. 4.11's, open Front discs, rear drums. All in working order. Full frame off 2 year resto by Iron Pig 3 years ago. 10K miles on it since then. Everything was replaced or gone through save for the trans and case, which...

Thread Filter

Google Preferred
Back
Top Bottom