Wits End Order Issues / Joey Romero (4 Viewers)

[WhiteyNorge]

I've looked at this and after reading the demand and the pure BS............ I'm going to make another run and offer to the LC community.

Everyone that has bought from me gets their parts.

Jason
TT

Hey Jason,

Could you clarify the date that payments for your bush pressing kits stopped? As I purchased the kit on 12th September 2023 with no knowledge of Wits End history, it will be helpful for me to negotiate with my credit card company if I can show them the link to this thread and prove he did not have stock when I purchased.

Unless of course Wits End has used another supplier, as he indicated to me by email that the kit had just arrived from the machinist, and I was only waiting because the axle seal driver needed anodizing.

Thanks for your help!

Best

Mark

 

[Funner]

He was such an integral part of this community for so long, I know he had zero plans to screw over anyone, got out of his control and he made some bad choices.. I hope for a positive outcome for everyone.

 

[Mudder]

SOLD OUT

If anyone is interested....... I have 20 sets (5 sets spoken for) 162.86 for the 4 bush set. No laser engraving and no plastic holder base.

Simply 4 machined bushes- no frills

162.86 plus 15.00 USPS priority shipping

PM me if you want a set

Just trying to recover 2 years on the shelf, materials and machining costs.

Pics were taken today...... no scam or BULLs***......... These are ready to box and ship.

Jason


SOLD OUT




View attachment 3420987

View attachment 3420988

Hey Jason,

Could you clarify the date that payments for your bush pressing kits stopped? As I purchased the kit on 12th September 2023 with no knowledge of Wits End history, it will be helpful for me to negotiate with my credit card company if I can show them the link to this thread and prove he did not have stock when I purchased.

Unless of course Wits End has used another supplier, as he indicated to me by email that the kit had just arrived from the machinist, and I was only waiting because the axle seal driver needed anodizing.

Thanks for your help!

Best

Mark

Based off of the quoted post above. He hadn’t paid for that set since around 2021. I hope you get your money back.

 

[1973Guppie]

Too bad to see this happen. I will say I have seen it several times before on this forum. Not often but it happens. I have the hard rule of disputing all charges not at my doorstep within 90 days. Even then I have had to fight to get my money back. The latest one the vendor tried to claim that their "cancellation fee" was 80% of the purchase price. So basically I get no parts and have to pay 80 percent. They claimed it was on their website somewhere. Eventually I won but it took a lot of my time and effort on the phone. Unfortunately this stuff happens and is part of "business" as a whole. Doesn't make it right but I am not surprised.

 

[mudgudgeon]

Hey all,

I'm in Norway and ordered a bush pressing kit and axle seal driver 12th September, does his bankruptcy filing now mean I've got no chance of disputing the $380 on my credit card?

Best

Mark

Your bank should refund your credit.
Definitely contact your bank

 

[TRAIL TAILOR]

Based off of the quoted post above. He hadn’t paid for that set since around 2021. I hope you get your money back.

Correct.

 

[WhiteyNorge]

Hey,

So the bush pressing kit has been available on his website for a period of over 2 years and he has not had stock to sell? Has he by chance had another machinist in that 2 years?

This may be a difficult question to answer, but when was the last time somebody received a bush pressing kit from Wits End?

I have just today curiously received an email from Wits End updating my order status, along with an international USPS tracking number that says awaiting item. Communication went dark 6 weeks ago.

Best

Mark

 

[Eyedaho]

Hey,

So the bush pressing kit has been available on his website for a period of over 2 years and he has not had stock to sell? Has he by chance had another machinist in that 2 years?

This may be a difficult question to answer, but when was the last time somebody received a bush pressing kit from Wits End?

I have just today curiously received an email from Wits End updating my order status, along with an international USPS tracking number that says awaiting item. Communication went dark 6 weeks ago.

Best

Mark

It's entirely possible that he is following this thread and sent the shipping notification so you wouldn't dispute the charges.

 

[sentient schmoo]

It's entirely possible that he is following this thread and sent the shipping notification so you wouldn't dispute the charges.

Exactly my thought.

 

[sentient schmoo]

Also, what a huge piece of s***.

 

[sentient schmoo]

In general.

 

[Feldrian]

Hey,

So the bush pressing kit has been available on his website for a period of over 2 years and he has not had stock to sell? Has he by chance had another machinist in that 2 years?

This may be a difficult question to answer, but when was the last time somebody received a bush pressing kit from Wits End?

I have just today curiously received an email from Wits End updating my order status, along with an international USPS tracking number that says awaiting item. Communication went dark 6 weeks ago.

Best

Mark

You're really over thinking this.

• You don't have the goods you ordered after a reasonable amount of time.
• The Vendor isn't communicating with you.

Dispute the charge on your credit card and move on. The fact you care as much as you do about the last time someone received the parts you're talking about is actually a testament of how much demand there is for Witt's End products in the market place and how much it sucks to lose a supplier. Unless credit card disputing rules are vastly different in Norway, I doubt you'll need a lot more than "didn't get what I ordered, Vendor won't reply to me" to reverse the charge.

 

[Eyedaho]

Plus, the kit will soon be available again through trail tailor, and you are guaranteed to promptly receive your order.

 

[WhiteyNorge]

You're really over thinking this.

• You don't have the goods you ordered after a reasonable amount of time.
• The Vendor isn't communicating with you.

Dispute the charge on your credit card and move on. The fact you care as much as you do about the last time someone received the parts you're talking about is actually a testament of how much demand there is for Witt's End products in the market place and how much it sucks to lose a supplier. Unless credit card disputing rules are vastly different in Norway, I doubt you'll need a lot more than "didn't get what I ordered, Vendor won't reply to me" to reverse the charge.

I agree with your thoughts, I really just want my bush pressing kit.

Anyway, moving on.

 

[sr5pickup]

Hey,

So the bush pressing kit has been available on his website for a period of over 2 years and he has not had stock to sell? Has he by chance had another machinist in that 2 years?

This may be a difficult question to answer, but when was the last time somebody received a bush pressing kit from Wits End?

I have just today curiously received an email from Wits End updating my order status, along with an international USPS tracking number that says awaiting item. Communication went dark 6 weeks ago.

Best

Mark

He did the same to me back in July, got a tracking # and everything, after month with no movement I emailed him and his excuse was his local post office was on strike and that was third time it’d happened (). I knew it was bullsh!7, but I followed up 2 more times with no response. Filed a dispute with my CC company and just recently won the dispute.

 

[NeverFinis]

He did the same to me back in July, got a tracking # and everything, after month with no movement I emailed him and his excuse was his local post office was on strike and that was third time it’d happened (). I knew it was bullsh!7, but I followed up 2 more times with no response. Filed a dispute with my CC company and just recently won the dispute.

This is exactly what he does. He issues fictitious tracking numbers and/or fake refund emails though his ecommerce site. He is hoping to delay you enough to cause your CC dispute rights to expire.

My limit for a delay in shipping an item is 30 days on everything not custom or built to order. The latter has to be from a reliable and an establish vendor with no history of shipping complaints for me to let it pass 30 days before I file a dispute.

@Trail Taylor I will be buying a bushing press tool once you get them made.

 

[sleepycruiser]

Dispute immediately if that is still an option.

 

[PDXDave67]

It's entirely possible that he is following this thread and sent the shipping notification so you wouldn't dispute the charges.

Knowing how self important and convinced of his own greatness the little guy is, how could there be any doubt that he's following this thread?
The guy lived on social media prior to going full douche bag, why would he be any different now, especially since we're all taking about HIM?...

Joey, we ALL know you're full of s*** and we all know you're here.

 

[raisinhell2]

this is getting good

 

[Broski]

But the bulk of the order was no included. Wanted to give him the benefit of the doubt but it looks like hes really given up on following through for his customers.

It was this exact attitude that let the Dude keep ripping member off !!