It has a tracker in it, they will come in the middle of the night to steal your 80 series! Quick, give it to me, mine is the less desirable white color and thieves will ignore it...
There is no need to find the leak. It can only come from the inner axle seal, they age, leak easily, and the surface of the axle shaft will have some wear by now, a perfect seal is possible but not really that important. Also, IIRC the fill level...
Pump grease in the knuckles through the inspection port and don’t drain the diff until you can get the fill bolt out. Always remove the refill bolt before the drain bolt. If you get enough grease in the knuckle and make sure the diff is full...
Finish it? With that list it seems mostly incomplete. What is done? Outsourcing this much of the work is going to be expensive. I feel for you, but man, this is going to need a diesel oriented fab shop, not sure who can tackle this or how many...
Not sure if these are a stocked item, may need a special order.
https://forum.ih8mud.com/threads/gauging-interest-on-puma-air-compressor-80-series-mount.812181/
Since it isn't your daily driver, just do it yourself. It will give you a chance to clean out the intake manifolds, clean the injectors, replace vacuum lines and neatly wrap the new harness. You will take more care to do it correctly than a...
Also, think the bypass hose #2 under the intake has a pin hole in it that is spraying on a dirty oily block and splashing back on that area. You will not likely be able to see the coolant leak unless you are under the truck with someone you trust...
Funny part - I bet a few young’ens here may not see any humor to that :D
Heck, it’s been since I left M&D’s home that I saw a bungie cord, let alone a corded landline and I alway remember my moms go-to saying was:
“when will you or your...
Not unless you've got some engine management tricks up your sleeve. The kit is designed around 2.5" or factory exhaust and anything that makes the turbo spool faster is likely to result in a lean condition. This is what breaks engines.
Not...
What is the lowest you’ve run this down? It seems with the usable power in a 50ah LifePO4 that would be sufficient? I know everyone likes overkill, but my use would just be a fridge, no induction cooking, that’s stays in my house.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.