thatcabledude
GOLD Star
2007 truck/suv water pump on the right
What the hell is goin on in Jimmy's Barn (10 Viewers)
- Thread starter CaptClose
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
2007 truck/suv water pump on the right
CenTXFJ60
SILVER Star
Ah yes. Easy to see and thank you Chris. So if I actually pull the radiator then I’ll recommend he go with the 07/up pump. Really trying to see if I can make it work, be functional and not worried about how it looks.
Cookie Cutter 5.3 Swap Into 62
dude you are just chugging away at this thing. Awesome work!
forum.ih8mud.com
Similar ish? @Dubs2017 uses this one per his build thread
Jimmy, here’s a picture of the setup I’ve been running on my 60 for the last 8 years. I used SOCO muffler/radiator here in Austin. I called the guy who did the work and he said it would cost <$200 to do this
The newer pump worked great for me. I had my radiator pressure tested, steam port added, and neck size changed to whatever the wp size is.
Cookie Cutter 5.3 Swap Into 62
dude you are just chugging away at this thing. Awesome work!
Similar ish? @Dubs2017 uses this one per his build thread
I actually have my intake off right now so snapped another pic.
CenTXFJ60
SILVER Star
Finally figured out the cooling issue on the LS62. Probably ran the truck to operating temps (and a bit beyond) 15-20x’s, released the steam and could never get her under control. The PO is a buddy and he recommended using compressed air to force the air pocket out via the steam line. Worked like a charm. Solid fluid for a bit then a lot of air. Topped off the radiator and then took it for about a 25 mile trek. Seamless. Just really glad to be done with this part of the project. Love the power of the LS but can say I’ll probably never venture down this road for myself. Way too many mods to keep track of 
.
.
CenTXFJ60
SILVER Star
So I’m done with SAS. Was an awesome trip this year. Down to focusing on my business (day job) and not taking on any other cruiser jobs. Unless is a total “boxed in job”. IE…knuckles, H55, or something that’s squared out and easy to see a beginning and end. Also, #1 rule is no timeline with the truck owner. Focusing on many things that have been nagging me around the hacienda. Will get that copper 85/60 in here and finalize things. My boys mother has been very patient on her end. Wonderful lady. So I’ve got a car hauler that’s been used as much by others (primarily one dude) as it has by me the last 12+ years. Lots of things been bothering me on it so I’ve decided to tackle the #1 issue. The factory 16g fenders are being replaced with 14g diamond plated fenders. Sweet upgrade and completely necessary. Many folks have driven right up on the old fenders…deformed the inner skirts, rubbed on the inside of tires and the rest is history. Super excited to have this behind me. Ran out of welding gas tonight so I’ll finish burning in the passenger side once the gas is replenished. Then I’ll get it on the lift and straighten out the guides underneath where the ramps slide in. The dude that’s mostly used the trailer over the years destroyed the ramp and the underpinnings years ago when he was using the trailer and the ramp slid out while going down the road and hit a curb. His comment was the trailer jumped several feet in the air!!! Regardless, I’m tired of having to carry the ramps in the bed of my truck vs under the trailer where they were intended to go. Lastly, going to make a spare tire mount using an old axle hub and some square tubing I have laying around. This trailer has hauled a lot of cruisers over the 24 years I’ve owned her and hope to get many more out of her. Oh yeah…going to replace the deck with some new treated lumber. This current wood is actually original.
That dry Texas weather ! Looks as good as my trailer and it's only 7years old.
The salt air around here just eats them up
CenTXFJ60
SILVER Star
Yes sir Richard. My first thought was to paint the wheel wells and trailer but the reality is it will outlast me in its current state. I’ve never been one to worry how it looks so I think I’ll save the prep/paint work for cruisers down the roadThat dry Texas weather ! Looks as good as my trailer and it's only 7years old.
The salt air around here just eats them up
CenTXFJ60
SILVER Star
Ramps are back in their home. Some time with the acetylene torch/hammer/pipe wrench they now slide in. Will pick up some new welding gas today and burn in the passenger fender and build a spare tire mount.
JohnnyFish
GOLD Star
In contrast to your experience, CB (capri blue '71) told me the story of his trailer and how the friends who borrow it have improved it in return. One attached a toolbox, and another welded in a receiver for a winch.
How it should be !!
CenTXFJ60
SILVER Star
Ha…most everyone that uses my stuff or shop do just that. Hell, I can’t tell you how many tools have been donated to the barn by my brother and others that recognize a need while I’m cheaping out on “good is good enough.
CenTXFJ60
SILVER Star
Super stoked to have the spare riding upright again.
CenTXFJ60
SILVER Star
Fetcher is a legend! Glad I was able to use it once and take your entrance gate out to pasture doing so!
CenTXFJ60
SILVER Star
That was epic CD. What a great first impression as it was the first day we met
4Cruisers
SILVER Star
Just wondering, did the load happen to be an FJ62 frame?
CenTXFJ60
SILVER Star
Yes sir John. Now that I think about it you’re the one that connected the dots and the reason CD and I met. He was picking up your frame that I carried back down here from Lubbock. Great recall.
4Cruisers
SILVER Star
And they say that once you hit 70 your memory goes down the toilet - NOT!
