Maybe the coolest pics of an 80 I’ve ever seen.
What Did You Do with Your 80 This Weekend? (70 Viewers)
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Love the rig, nice chrome peices
You should see what I found in mine
Bit of camping last weekend, then some wheeling up Millville canyon, Utah today.
Marlin reduction and 2WD.
Finally got out fishing with dad and the boys.
In addition to swapping axles for the magic dial and putting 4.88’s, the ( @inkpot @richardlillard1 @Stikboy9480) did some incredible work, gracias amigos:
1. Added Rear lower control arms (sleeved on 3/16” wall DOM tubing for strength with new OE bushings)
2. Installed Rear spring retainers
3. Radius arms narrowed down ~.3” to help with articulation and OE bushings narrowed to match the arms
4. Installed @NLXTACY caster plates for 4” lift, M16 bolts installed to retain Toyota nuts for the radius arm hardware.
5. Installed Drop brackets for front and rear ABS harnesses
6. Installed @NLXTACY extended brake lines front and rear
7. Installed New OE front panhard bushings
8. Welded/reinforced the frame rail around the steering box/panhard frame mount to prevent cracking along with a gusset for the front panhard mount to strengthen the frame rail
9. Adjusted the transmission kick down cable slightly
10. Straightened the steering wheel, been bothering me for years!
11. Removed 10lbs of dried mud built up along the frame.
Zona
1. Added Rear lower control arms (sleeved on 3/16” wall DOM tubing for strength with new OE bushings)
2. Installed Rear spring retainers
3. Radius arms narrowed down ~.3” to help with articulation and OE bushings narrowed to match the arms
4. Installed @NLXTACY caster plates for 4” lift, M16 bolts installed to retain Toyota nuts for the radius arm hardware.
5. Installed Drop brackets for front and rear ABS harnesses
6. Installed @NLXTACY extended brake lines front and rear
7. Installed New OE front panhard bushings
8. Welded/reinforced the frame rail around the steering box/panhard frame mount to prevent cracking along with a gusset for the front panhard mount to strengthen the frame rail
9. Adjusted the transmission kick down cable slightly
10. Straightened the steering wheel, been bothering me for years!
11. Removed 10lbs of dried mud built up along the frame.
Zona
Bludozer
SILVER Star
Lucky to have a crew like that near you. Us helpless morons need to stick together
NLXTACY
Wits' End
100%
8794060130C0 (Left)
8791060190C0 (Right)
Double check my numbers before ordering. When I was a newbie I ordered both from Cruiser parts. They had one in stock, and one they ordered through Earnhardt Toyota, in AZ.
Toyota parts deal shows it as available, my go to dealers show it as NLA. I'm going to guess a few dealers still have them on shelves.
richardlillard1
SILVER Star
I would be less worried about insulating it and more worried about tying it back to that peg so it isn’t flopping around on the EGR pipe.
This place is the best....look at all that usefull info in just the last few posts, thx everyone
LC4LIFE
Supporting Vendor
Fun trip with my daughter and friends to Windrock, Nemo Tunnel and Obed.
Today I was finally able to finish up the Marlin Crawler Marlink HD upgraded steering. With concern about the larger diameter tube from Marlin Crawler, I used an angle grinder to grind down the radius arms. All I took off was the ridge on the radius arms and I ended up with plenty of room.
Oh and I passed a milestone today, 241001 mile mark.
And just a poser picture.
Oh and I passed a milestone today, 241001 mile mark.
And just a poser picture.
Took the family on a road trip to see Bishops Castle by Pueblo in Colorado. Side trip to but some 6 point wrenches in Pueblo
Mr. Jim Bishop built this castle by himself stone by stone. Started in 1959? at the age of 15. He is still on the property and got to meet him yesterday.
What a creative man and full of stories.
Had not been driving cruiser, 80, myself so wanted to see how it did. Daughters DD.
Full tank of gas and drove like a dream. Filled up today and got 14.5 MPG.
Thought I heard a exhaust leak so checking exhaust. It has been 14 months since head Gasket job. Cruised at 70-80 mph no problem and handled the mountain hills/ turns wonderful. 288k and counting
Mr. Jim Bishop built this castle by himself stone by stone. Started in 1959? at the age of 15. He is still on the property and got to meet him yesterday.
What a creative man and full of stories.
Had not been driving cruiser, 80, myself so wanted to see how it did. Daughters DD.
Full tank of gas and drove like a dream. Filled up today and got 14.5 MPG.
Thought I heard a exhaust leak so checking exhaust. It has been 14 months since head Gasket job. Cruised at 70-80 mph no problem and handled the mountain hills/ turns wonderful. 288k and counting
Put a tailpipe on after cutting the exhaust for the new bumper. Much better, now I just need to redo it from the tailpipe to the motor 
