I’m out of adjustment and it’s at 14BTDC.
What did you do with your 60 this weekend? (24 Viewers)
- Thread starter MrMoMo
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
What country did that gauge cluster come from? The diff lock indicator is really cool.
Jesus that thing is gorgeous.
Need to know more about the extended shifter knob on the transfer case. I love that. Sorry if you’ve explained this somewhere else.
CenTXFJ60
SILVER Star
Chris, I picked this cluster up from John at Radd Cruisers in Canada. It’s from an early RHD 61 so I’m assuming it came out of Japan originally. Funny enough the lock indicator was the reason I bought the cluster to use with some cable axles I have.
Got my distributor in correctly, and found the source of my exhaust leak. I was thinking it was the manifold gasket, but it was done approx 1,000mi ago. Found this crack in the emissions rail. At least it’s right up front and an easy location to goop some JB weld on.
I used some quicksteel for the repair. It’s curing now so I’ll know in a little bit if it’s fixed. I figured the emissions rail hasn’t been off in 36 years, so I shouldn’t need to take it off any time soon, either.
I used some quicksteel for the repair. It’s curing now so I’ll know in a little bit if it’s fixed. I figured the emissions rail hasn’t been off in 36 years, so I shouldn’t need to take it off any time soon, either.
Last edited:
Hojack
♠️Project Snowball❄️
Quick summary of a long 10hr Saturday.
Got the front shackle hangers mounted and started playing with the load angle at ride height.
Used an I-Beam and the forklift which made for easy work.
Mocked up the front axle for mounting the Ruff Stuff SOA kit.
Tack welded the perches. Removed axle and welded perches. Removed the 3rd member for install of my Harrop Elocker.
Used pipe cutter to do the cut and turn. The blade broke just after completing the first cut. Used am angle grinder with cutoff disc on the second one.
Need to get a longer leaf for the front springs as they have a slight negative arch with load at ride height. Need to take the 3rd member and Elocker to KNA Offroad to have it installed. Next week to start on the rear axle. Still a lot of work to do.
Got the front shackle hangers mounted and started playing with the load angle at ride height.
Used an I-Beam and the forklift which made for easy work.
Mocked up the front axle for mounting the Ruff Stuff SOA kit.
Tack welded the perches. Removed axle and welded perches. Removed the 3rd member for install of my Harrop Elocker.
Used pipe cutter to do the cut and turn. The blade broke just after completing the first cut. Used am angle grinder with cutoff disc on the second one.
Need to get a longer leaf for the front springs as they have a slight negative arch with load at ride height. Need to take the 3rd member and Elocker to KNA Offroad to have it installed. Next week to start on the rear axle. Still a lot of work to do.
Hauled steel.
Bought a green kit $13 on amazon over a year ago. Finally decided I no longer needed an ash tray and trimmed the edges of it to fit in the face. Nice and snug. USB, 12v socket and a volt meter.
It will be wired via the switch on the right to the aux battery.
It will be wired in with my inclinometer.
It will be wired via the switch on the right to the aux battery.
It will be wired in with my inclinometer.
drive to edmonton for an oilers game (dam you vegas!!). on my way home stopped to pick up some OME springs for a future 40 build and while i’m here i’m getting a roof rack for the 62. i’m currently sitting i. the parking lot waiting for it to open
Which roof rack did you go with?!
arb alloy. i had been in line for trail tailors but as that had fallen through i ponied up and bought this one
a painful one man job but it’s on. i had to put it on because it doesn’t fit inside and i gotta go back to home to sask today!!
i did have help lifting it up there
peel.
Hojack
♠️Project Snowball❄️
I thought that’s what that was made for
Small (hopefully) rust bubble repair
My weekend. got the glass back in tonight. Details in the link
Hope it holds up.
My weekend. got the glass back in tonight. Details in the link
Hope it holds up.
Last edited:
Clear coat still needs a wet sand and polish with rubbing compound.
Picked up a used old-style ARB front bumper with what appears to be the brackets and hardware intact. Now I need to get those pesky rivets out…
rust be gone
@NearJetties I admire your courage! I need to do this as well!
