Builds The honey badger build (2 Viewers)

[Firemedic831]

LOL if i could get a electric fan to work it would have been in there . I did put a Pusher fan on the front at one point and it works I just dont care for the look of it . Somehow someway i am going to figure this out so that my 40 crawls and stays cool . I Can not move my trans / t case back anymore as the drum brake would be into my rear lower link mount . So i either find a t case that sits closer to the th400 trans and has more clearance for a rear u joint . or i change transmissions What i am not sure of is if i get a atlas will it tick the boxes i need . They do not have the drum brake and the rear output would be centered so would it give me say 3 inches to go back ??? This i do not know. I would love to keep the auto in it .

 

[DangerNoodle]

I fought what you were going through for a while. It's why I ended up with the drivetrain that I did. I wanted something super driveable while still being low enough to crawl. It's a big challenge for sure.

 

[EWheeler]

What i am not sure of is if i get a atlas will it tick the boxes i need . They do not have the drum brake and the rear output would be centered so would it give me say 3 inches to go back ??? This i do not know. I would love to keep the auto in it .

It would require some work, but minimal costs to see if an Atlas would solve your issues using a mock-up.

Mockup Transfer Case Kit

Made of 16ga A1008 cold rolled steel, featuring a precision laser cut tab and slot design. This light weight sheetmetal mock-up transfer case is an invaluable tool for anybody waiting on the real thing and/or just don't want to keep lugging around a heavy transfer case. Easy to put in place and...

tac1fab.com

 

[Firemedic831]

It would require some work, but minimal costs to see if an Atlas would solve your issues using a mock-up.

Mockup Transfer Case Kit

Made of 16ga A1008 cold rolled steel, featuring a precision laser cut tab and slot design. This light weight sheetmetal mock-up transfer case is an invaluable tool for anybody waiting on the real thing and/or just don't want to keep lugging around a heavy transfer case. Easy to put in place and...

tac1fab.com

Now this is gold .

 

[peesalot]

Heater, check out a rear heater from a 60' or 62', self contained just add power & water & can put almost anywhere.
You using stock radiator, NO, put a stock radiator in and the fan will have room. I am with you on the 465, its a constant toss up , at the end of the day the stick will slow you down a bit as the gap between 2nd & 3rd is a shift fest sometimes or just go slower thats why the auto allows more average speed plus down hill the auto is faster but you ride the brakes, I like the control with the stick, if your engine will idle really low its almost like an EV.

 

[Firemedic831]

I have the stock rad mount and the aluminum rad fits like a stock rad. It’s not the rad. It’s the placement of my engine because of the TH400 trans. Something needs to shrink or move 3 inches One way or another it’s going to get fixed . 60 heater. Sounds interesting

 

[peesalot]

I have a rear heater unit you can have if you want to try it out. For s***s and giggles you could check with georg and see if there is a th400 output that has same spline as 1 of the orion inputs gears then you could make a plate adapter, ditch the spud shaft & housing, pick up that 3" or go to the 465 then I'll have a chance at keeping up.

 

[Firemedic831]

Spent a few hours this weekend messing with things. Finally putting things together

 

[peesalot]

whats the little tool for ?

 

[Firemedic831]

That is to install the locking strip

 

[gnob]

That is to install the locking strip

is it actually helpful? did you still use lube?
my thumbs hated me after installing similar rubber in the Datsun.

 

[Firemedic831]

is it actually helpful? did you still use lube?
my thumbs hated me after installing similar rubber in the Datsun.

Once i figured out how it actually worked , It took me about 45 seconds to install . I just sprayed glass cleaner as a lube i know they sell some though .

 

[Firemedic831]

So when I got this hard top it had this cool
Crager center cap covering the cb ball mount holes . I decided to not use the Crager center cap . And got a new ball mount and antenna

 

[peesalot]

Ima leave that one alone......

 

[Firemedic831]

Spector Clause showed up again today . Glad I paid extra to get OEM. . I think they use that word loosely . Anyways it’s in. Side window was kinda of a bear .

 

[Firemedic831]

I did the underside today.

 

[Mike Shull]

I did the underside today.

View attachment 3782030

View attachment 3782031

Where did you get the new steel piece on the front?

 

[Firemedic831]

That is my old one I sand blasted and powder coated

 

[Mike Shull]

That is my old one I sand blasted and powder coated

It looks brand new.

 

[AgentOrange]

I did the underside today.

View attachment 3782030

View attachment 3782031

That looks impressively good and even, especially for the temps we've had up here. Was making my welds look like hot garbage until I got the garage warm enough.