Took the truck out for another 40 miles today and threw the GoPro on the back. My neighbor thinks I'm insane but new hardware always stresses me out from pushing it much. Even if it should be totally overbuilt, it's not like slapping on some...
@Tigerstripe40 I had the same issues as you. Also keep my ARB fridge either in the 60 or 40 100% of the time. Here’s what worked for me to solve the problem. 1 hour of work & instant results.
Clean the coils of the fridge: I removed the...
I had a period of analysis paralysis over the 2nd 15 degree bend with the 25 degrees of rotation.
On the first bend I rotated the tube down and did the bend. Perfect.
I'm working from the center out. Not from one end to the other so I wasn't...
I think I got'r. Sorry for the long winded rants but I'm struggling a bit. I suck at math but I "assumed" that my bend angles should add up to 90 degrees on each side.
The top is horizontal and the bottom legs are straight up. The top protractor...
One day and about 75’ of the cheapest split loom I could find I’ve turned a spaghetti mess of wires into more of an octopus. I still have to sort out power for a couple sensors, fuel pumps, and connections to a battery but the wiring prototype is...