Finally a workshop/storage/mancave (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

I thought that it would be nice to dress it up a bit.
I added two side pieces to add some with to it.
They have a slight bend as the top drawer tilts up a bit in the front.
5C89EC65-7C19-4A69-A838-91A15FDE8DC8.jpeg

F1581285-0B05-42BC-A86C-2F3D8032B5B2.jpeg

Next I cut three fronts for the drawer.
68661C4D-E555-4F4D-BB48-8C993F66806D.jpeg

And a top plate, I still need to cut that to size and bend the front and rear lip.
64BAAED2-7BC2-4EAA-B526-8B6F14165377.jpeg
 
I’m building a frame for bottle and rods.
Here is the basic frame with holder for the bottle in progress. Not sure about the bottom yet.
8509DBD8-068D-40D6-A228-0DA091D8AB0D.jpeg
B3C79E03-1BCE-466E-BE96-4AFAFDCBFF6A.jpeg

Attached a hinge to open up the bottle holder.
933E7653-99D7-4FDA-B0CB-CAA5A3C92B15.jpeg
8FF6E30A-BB0E-4750-932C-C02987DAE933.jpeg
 
Some progress on the cart.
6DABFEE4-9EE5-4409-BDD9-5E88DB0E7070.jpeg

Added extra tubes and a wooden place holder.
34DCB8CB-8424-4AF4-B59E-64485F6FD288.jpeg

And some sorting of assortements.
0D0A5AD2-D2A0-44D4-AC87-308499AB536D.jpeg

Which needed a place too from this
0C8658C0-53F3-459A-8D42-61DF35A42D98.jpeg

To this.
1739B685-AFEB-45F7-B16A-1D926B994A0D.jpeg

Almost ready to clear out the rear end repaint the floor.
 
Had the trays under the work bench that are now in the new cabinet. So I decided to do something with the space.
1F3E9038-0801-4BB1-A8C3-50D47D7331E7.jpeg

adding some sides and a front plus some felt on the inside.
FA3A9EDE-F2AF-4840-ADAE-F6065D48855F.jpeg

very nice for specific equipment.
D58B40D4-72F7-405E-8F62-96157AB430A3.jpeg
 
Love the plastic storage trays. Where'd you find them?
 
Last edited:
Ordered a DRO for the lathe and bought and installed a fourth set of storage trays.
CAD0AEF6-9D46-4A1B-9EE6-F62463BC0D61.jpeg

found a mod on YouTube for the box brake that I’m going to add to it.
 
Really like what you are doing in your shop. Great ideas. We just did the same at the Elf Barn for storage. Found some retro bolt trays a person who use to build model T fords was selling. They don’t make them like they used to in the old days. Got a 5gal bucket of Toyota bolts to sort now. :steer:

AD8E9178-2BFE-4ACB-9740-9178C8E3015F.jpeg
 
Really like what you are doing in your shop. Great ideas. We just did the same at the Elf Barn for storage. Found some retro bolt trays a person who use to build model T fords was selling. They don’t make them like they used to in the old days. Got a 5gal bucket of Toyota bolts to sort now. :steer:

View attachment 2206299
Always take time to clean and organize.🤓
 

Users who are viewing this thread

Back
Top Bottom